How To Clean A Sig Sauer P320?

The Sig Sauer P320 is a popular handgun for both personal and professional use. As with any firearm, it is important to clean and maintain your P320 regularly to ensure its proper function and safety. In this article, we will walk you through the steps of cleaning a Sig Sauer P320, from disassembly to reassembly. We’ll also provide some tips on how to keep your P320 in top condition.

So whether you’re a new P320 owner or you’re just looking for a refresher on how to clean your handgun, read on for all the information you need.

Step	Instructions	Image
1	Remove the magazine and any cartridges from the pistol.
2	Depress the slide lock and pull the slide back to expose the barrel.
3	Use a cleaning rod and bore brush to clean the barrel.
4	Apply a small amount of gun oil to the slide rails and other moving parts.
5	Reassemble the pistol and dry fire it a few times to distribute the oil.

The Sig Sauer P320 is a striker-fired pistol that is popular among both law enforcement and civilian shooters. It is a reliable and accurate pistol, but it is important to clean it regularly to maintain its performance. This guide will show you how to disassemble and clean a Sig Sauer P320.

Disassembly

1. Remove the magazine and ensure the firearm is unloaded.
2. Depress the takedown lever and slide the slide forward off the frame.
3. Remove the recoil spring assembly and guide rod from the slide.
4. Remove the barrel from the slide.

Cleaning

1. Use a cleaning brush and solvent to clean the exterior of the slide and frame. Be sure to clean the areas around the firing pin, extractor, and slide rails.
2. Use a bore brush and solvent to clean the barrel. Be sure to clean the rifling and the chamber.
3. Apply a light coat of oil to the exterior of the slide and frame.
4. Apply a light coat of oil to the barrel.

Reassembly

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly and guide rod into the slide.
3. Slide the slide forward onto the frame.
4. Depress the takedown lever and release the slide.

By following these steps, you can easily disassemble and clean your Sig Sauer P320. This will help to keep your pistol in good working order and ensure its accuracy.

Additional Tips

• When cleaning the barrel, be sure to use a bore brush that is the same diameter as the barrel.
• Do not use too much solvent when cleaning the pistol. This can damage the finish.
• After cleaning the pistol, be sure to dry it completely before reassembling it.
• Store the pistol in a clean, dry place.

Disassembly

To disassemble the Sig Sauer P320, follow these steps:

1. Remove the magazine.
2. Depress the takedown lever and pull the slide back until it is in the locked position.
3. Rotate the takedown lever 90 degrees clockwise.
4. Pull the slide forward off of the frame.

The slide and barrel can now be separated by removing the recoil spring assembly and guide rod.

Cleaning

To clean the Sig Sauer P320, you will need the following materials:

• A cleaning brush
• A cleaning solvent
• A rag
• A gun oil

1. Remove the slide and barrel from the frame.
2. Spray the cleaning solvent on the slide and barrel.
3. Use the cleaning brush to scrub the slide and barrel.
4. Wipe down the slide and barrel with a rag.
5. Apply a light coat of gun oil to the slide and barrel.

Reassembly

To reassemble the Sig Sauer P320, follow these steps:

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly and guide rod into the slide.
3. Slide the slide forward onto the frame.
4. Depress the takedown lever and ensure the slide is locked in place.

Lubrication

To lubricate the Sig Sauer P320, you will need the following materials:

• A gun oil
• A rag

1. Apply a light coat of oil to the following areas:

• The rails of the slide
• The contact points between the slide and frame
• The trigger mechanism
• The magazine catch

2. Wipe down the gun with a rag to remove any excess oil.

By following these steps, you can properly clean, maintain, and lubricate your Sig Sauer P320. This will help to ensure that your gun is in peak condition and that it will function properly when you need it most.

How often should I clean my Sig Sauer P320?

A: It is recommended to clean your Sig Sauer P320 after every 500 rounds fired. However, if you are shooting in dirty or dusty conditions, you may need to clean it more often.

What do I need to clean my Sig Sauer P320?

A: You will need the following items to clean your Sig Sauer P320:

• A cleaning kit specifically designed for Sig Sauer pistols
• Gun oil
• A cleaning cloth
• A toothbrush
• A boresnake

How do I clean the exterior of my Sig Sauer P320?

A: To clean the exterior of your Sig Sauer P320, follow these steps:

1. Remove the magazine and the slide from the frame.
2. Use a cleaning cloth to wipe down the exterior of the frame and slide.
3. Use a toothbrush to clean the areas around the trigger and the slide release.
4. Apply a small amount of gun oil to the exterior of the frame and slide.
5. Reassemble the pistol.

How do I clean the interior of my Sig Sauer P320?

A: To clean the interior of your Sig Sauer P320, follow these steps:

1. Remove the slide from the frame.
2. Use a boresnake to clean the barrel.
3. Use a cleaning brush to clean the chamber and the inside of the slide.
4. Use a toothbrush to clean the extractor and the firing pin.
5. Apply a small amount of gun oil to the interior of the slide and barrel.
6. Reassemble the pistol.

What are some common problems with Sig Sauer P320s and how can I fix them?

A: Some common problems with Sig Sauer P320s include:

• Failure to feed
• Failure to eject
• Trigger problems
• Jams

Here are some tips on how to fix these problems:

• If your Sig Sauer P320 is not feeding properly, you may need to adjust the magazine catch or the feed ramp.
• If your Sig Sauer P320 is not ejecting properly, you may need to clean the extractor or replace the ejector spring.
• If your Sig Sauer P320’s trigger is not working properly, you may need to adjust the trigger pull weight or replace the trigger assembly.
• If your Sig Sauer P320 is jamming, you may need to clean the gun more often or replace the recoil spring.

If you are unable to fix these problems yourself, you should take your Sig Sauer P320 to a qualified gunsmith.

Congratulations on completing this tutorial on how to clean a Sig Sauer P320! We hope you found this information helpful and that you are now able to properly maintain your firearm. As a reminder, it is important to clean your firearm regularly in order to ensure its safety and reliability. By following the steps outlined in this tutorial, you can help to keep your Sig Sauer P320 in top condition for years to come.

Here are some key takeaways from this tutorial:

• The most important part of cleaning your Sig Sauer P320 is to remove all dirt, debris, and oil from the firearm.
• You should clean your firearm after every use, or at least once a month.
• Be sure to use the correct cleaning solvent and lubricant for your firearm.
• Take your time and be careful when cleaning your firearm.
• If you are unsure how to clean your firearm, consult a qualified gunsmith.