How To Clean A Glock 42?

How to Clean a Glock 42

The Glock 42 is a popular subcompact handgun that is known for its reliability and accuracy. However, like any firearm, it is important to clean and maintain your Glock 42 regularly to ensure that it continues to function properly.

In this article, we will discuss the steps involved in cleaning a Glock 42. We will also provide some tips on how to keep your Glock 42 clean and well-maintained.

So, if you are a Glock 42 owner, or if you are thinking about purchasing one, read on for all the information you need to know about cleaning and maintaining your Glock 42.

Step	Instructions	Image
1	Remove the slide from the frame.
2	Disassemble the slide.
3	Clean the slide and frame with a solvent and a brush.
4	Lubricate the slide and frame with a light oil.
5	Reassemble the slide and frame.

The Glock 42 is a striker-fired, semi-automatic pistol chambered in .380 ACP. It is a small, lightweight pistol that is ideal for concealed carry. However, like all firearms, the Glock 42 needs to be cleaned and maintained regularly to ensure proper function.

This guide will show you how to disassemble, clean, and reassemble the Glock 42. It is important to note that this guide is for informational purposes only. Please consult your owner’s manual for specific instructions on how to clean your Glock 42.

Disassembly and Assembly

To disassemble the Glock 42, you will need the following tools:

• A Glock disassembly tool
• A cleaning rod
• A bore brush
• A solvent
• A lubricant

1. Remove the magazine from the Glock 42.
2. Depress the trigger and lock the slide back.
3. Insert the disassembly tool into the hole in the rear of the slide.
4. Turn the disassembly tool clockwise until the slide release lever is disengaged.
5. Move the slide forward and off of the frame.
6. Remove the recoil spring assembly from the slide.
7. Remove the barrel from the slide.

To reassemble the Glock 42, follow these steps in reverse order.

Cleaning the Exterior

To clean the exterior of the Glock 42, you will need the following materials:

• A cleaning cloth
• A solvent
• A lubricant

1. Wipe down the exterior of the Glock 42 with a cleaning cloth.
2. Apply solvent to a cleaning cloth and wipe down the slide, frame, and barrel.
3. Apply lubricant to a cleaning cloth and wipe down the slide, frame, and barrel.

Cleaning the Interior

To clean the interior of the Glock 42, you will need the following materials:

• A bore brush
• A solvent
• A lubricant

1. Insert the bore brush into the barrel and rotate it back and forth to clean out any debris.
2. Apply solvent to a cleaning cloth and wipe down the inside of the slide and frame.
3. Apply lubricant to a cleaning cloth and wipe down the inside of the slide and frame.

By following these steps, you can keep your Glock 42 clean and functioning properly. For more information on how to clean your Glock 42, please consult your owner’s manual.

3. Cleaning the Interior

The interior of the Glock 42 is relatively simple to clean, and can be done with a few simple tools.

• A cleaning rod
• A bore brush
• A solvent
• A lubricant

1. First, remove the slide from the frame. To do this, push down on the slide release lever and pull the slide forward and off of the frame.
2. Next, clean the barrel. To do this, insert the cleaning rod into the barrel and attach a bore brush to the end of the rod. Push the bore brush through the barrel several times, using the solvent to help loosen any dirt or debris.
3. Clean the firing pin assembly. To do this, remove the firing pin from the slide. To do this, insert a small punch into the hole in the back of the firing pin and push it out. Once the firing pin is out, clean it with a solvent and a cloth.
4. Clean the striker assembly. To do this, remove the striker from the slide. To do this, insert a small punch into the hole in the back of the striker and push it out. Once the striker is out, clean it with a solvent and a cloth.
5. Clean the magazine. To do this, remove the magazine spring and follower from the magazine. To do this, hold the magazine upside down and press down on the follower until it pops out. Once the spring and follower are out, clean them with a solvent and a cloth.

Once the interior of the Glock 42 is clean, reassemble it and apply a small amount of lubricant to the moving parts.

4. Lubrication

The Glock 42 should be lubricated regularly to ensure that it functions properly.

• A light oil
• A grease

1. Apply a small amount of oil to the slide rails.
2. Apply a small amount of oil to the barrel.
3. Apply a small amount of oil to the firing pin assembly.
4. Apply a small amount of oil to the striker assembly.
5. Apply a small amount of oil to the magazine.

The Glock 42 should be lubricated every few hundred rounds. However, if the gun is used in dirty or dusty conditions, it may need to be lubricated more often.

How much lubricant to use

The Glock 42 should only be lubricated with a small amount of oil or grease. Too much lubricant can cause the gun to malfunction.

When to lubricate the Glock 42

The Glock 42 should be lubricated after every few hundred rounds. However, if the gun is used in dirty or dusty conditions, it may need to be lubricated more often.

How often should I clean my Glock 42?

• Answer: Glock recommends cleaning your Glock 42 after every 500 rounds fired. However, you may need to clean it more often if you are shooting in dirty or dusty conditions.

What do I need to clean my Glock 42?

• Answer: You will need the following items to clean your Glock 42:
• A cleaning kit specifically designed for Glock pistols
• Gun cleaning solvent
• Gun cleaning oil
• A soft cloth
• A toothbrush
• Q-tips

How do I clean the exterior of my Glock 42?

• Answer: To clean the exterior of your Glock 42, follow these steps:

1. Remove the magazine from the pistol and ensure that the pistol is unloaded.
2. Disassemble the pistol according to the manufacturer’s instructions.
3. Use a soft cloth to wipe down the exterior of the pistol, removing any dirt or debris.
4. Use a toothbrush and gun cleaning solvent to clean the hard-to-reach areas of the pistol, such as the slide serrations and the trigger guard.
5. Reassemble the pistol and apply a light coat of gun cleaning oil to the exterior surfaces.

How do I clean the interior of my Glock 42?

• Answer: To clean the interior of your Glock 42, follow these steps:

1. Remove the slide from the frame.
2. Use a cleaning rod and gun cleaning solvent to clean the barrel.
3. Use a bore brush to clean the inside of the barrel.
4. Use a cleaning rod and gun cleaning solvent to clean the slide rails.
5. Use a toothbrush and gun cleaning solvent to clean the inside of the slide.
6. Reassemble the pistol and apply a light coat of gun cleaning oil to the interior surfaces.

What are some common mistakes people make when cleaning their Glock 42?

• Answer: Some common mistakes people make when cleaning their Glock 42 include:
• Using the wrong cleaning solvent or oil.
• Using too much cleaning solvent or oil.
• Not cleaning the pistol thoroughly enough.
• Not properly reassembling the pistol.

How can I prevent my Glock 42 from becoming dirty?

• Answer: You can prevent your Glock 42 from becoming dirty by taking the following steps:
• Shooting in clean and dry conditions.
• Cleaning the pistol after every use.
• Storing the pistol in a clean and dry place.
• Using a gun cleaning kit specifically designed for Glock pistols.

  cleaning your Glock 42 is a simple and necessary task that can help to keep your firearm in good working order and prevent malfunctions. By following the steps outlined in this guide, you can clean your Glock 42 quickly and easily, and keep it ready to use when you need it most.

Here are a few key takeaways to remember when cleaning your Glock 42:

• Always use the right cleaning solvent and lubricant for your firearm.
• Be sure to follow the manufacturer’s instructions for cleaning and lubrication.
• Take your time and be careful not to damage your firearm.
• Clean your Glock 42 regularly to prevent malfunctions.

By following these tips, you can keep your Glock 42 clean and functioning properly for years to come.