How to Change the Combination on Your Cannon Safe

How to Change the Combination on a Cannon Safe

Your Cannon safe is a valuable investment, and it’s important to keep it secure. One way to do this is to change the combination regularly. This will make it more difficult for thieves to break into your safe, and it will also give you peace of mind knowing that your valuables are safe.

Changing the combination on your Cannon safe is a simple process, and it only takes a few minutes. In this article, we’ll walk you through the steps involved, so you can be confident that your safe is secure.

1. Gather your materials

Before you begin, you’ll need to gather the following materials:

• Your Cannon safe’s owner’s manual
• A pen or pencil
• A piece of paper
• The new combination you want to use

2. Read the owner’s manual

The first step is to read the owner’s manual for your Cannon safe. This will provide you with specific instructions on how to change the combination.

3. Enter the old combination

Once you’ve read the owner’s manual, you can begin the process of changing the combination. First, open the safe and enter the old combination.

4. Turn the dial to the left

Next, turn the dial to the left until you hear a click. This will unlock the combination change mechanism.

5. Enter the new combination

Now, you can enter the new combination you want to use. Be sure to enter the combination carefully, as you won’t be able to see the numbers as you enter them.

6. Turn the dial to the right

Once you’ve entered the new combination, turn the dial to the right until you hear a click. This will lock the combination change mechanism.

7. Close the safe

Finally, close the safe and test the new combination. You should be able to open the safe using the new combination you just entered.

Step	Instructions	Image
1	Unlock the safe with the current combination.
2	Turn the dial to the first number of the new combination.
3	Push the button in the center of the dial.
4	Turn the dial to the second number of the new combination.
5	Push the button in the center of the dial again.
6	Turn the dial to the third number of the new combination.
7	Turn the dial back to the first number of the new combination.
8	Push the button in the center of the dial one more time.

How To Change Combination On Cannon Gun Safe?

Tools and Materials Needed

• Combination lock key
• Paper clip or other thin, pliable object
• New combination

Steps to Change Combination

1. Open the safe and remove the combination lock.
2. Locate the combination lock’s reset button. This button is usually located on the back of the lock.
3. Insert the paper clip or other thin, pliable object into the reset button and press down.
4. While holding down the reset button, turn the combination lock dials to the new combination.
5. Release the reset button and close the safe.

Important Notes

• Be sure to write down the new combination so that you don’t forget it.
• If you are unable to change the combination, you can contact Cannon customer service for assistance.

Changing the combination on a Cannon gun safe is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your safe is secure and that only you have access to its contents.

How To Change Combination On Cannon Gun Safe?

Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. Here are the steps involved:

1. Unlock the safe and open the door.
2. Locate the combination lock. The combination lock is located on the front of the safe, just below the door handle.
3. Turn the dial to the left until the first number of the new combination is aligned with the index mark.
4. Turn the dial to the right until the second number of the new combination is aligned with the index mark.
5. Turn the dial to the left until the third number of the new combination is aligned with the index mark.
6. Close the door and lock the safe.

The combination on your Cannon gun safe has now been changed.

Open the safe and remove the combination lock.

To open the safe, you will need to enter the current combination. Once the safe is open, you can remove the combination lock by following these steps:

1. Locate the release button on the back of the lock. The release button is a small, recessed button located on the back of the lock.
2. Press the release button and hold it down.
3. While holding down the release button, turn the dial to the left until it stops.
4. Release the release button.

The combination lock will now be released and you can remove it from the safe.

Locate the reset button on the back of the lock.

The reset button is a small, recessed button located on the back of the lock. To locate the reset button, follow these steps:

1. Turn the safe over so that the back is facing you.
2. Locate the small, recessed button on the back of the lock.

The reset button is usually located near the bottom of the lock.

Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can easily change the combination on your safe and keep your firearms secure.

How to Change Combination on a Cannon Gun Safe?

1. What tools do I need?

You will need a Phillips head screwdriver and a new combination.

2. How do I get started?

First, remove the screws from the back of the safe. Then, open the safe and remove the old combination lock. Next, insert the new combination lock into the safe and secure it with the screws. Finally, close the safe and test the new combination.

3. What if I forget my combination?

If you forget your combination, you can reset it by using the following steps:

• Remove the screws from the back of the safe.
• Open the safe and remove the old combination lock.
• Insert a paperclip into the hole in the center of the combination lock.
• Turn the paperclip clockwise until you hear a click.
• Turn the paperclip counterclockwise until you hear another click.
• The combination lock is now reset.

4. What if I lose my combination card?

If you lose your combination card, you can contact Cannon customer service for a replacement.

5. Is there anything else I should know?

• Be sure to write down your new combination and keep it in a safe place.
• Do not share your combination with anyone.
• If you are concerned about the security of your safe, you may want to consider adding a security cable or a biometric lock.

  Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your safe is secure and that only you have access to its contents.

Here are the key takeaways from this guide:

• To change the combination on your Cannon gun safe, you will need the original combination, a new combination, and a Phillips head screwdriver.
• The first step is to open the safe and enter the original combination.
• Next, turn the dial to the left until you hear a click.
• Hold the dial in this position and use the screwdriver to turn the locking lever counterclockwise.
• Release the dial and enter the new combination.
• Turn the dial to the left until you hear a click.
• Hold the dial in this position and use the screwdriver to turn the locking lever clockwise.
• Release the dial and close the safe.

By following these steps, you can easily change the combination on your Cannon gun safe and keep your firearms secure.