How To Take Glock 42 Apart?

ByBuffalo Rifles Blog

How to Take Glock 42 Apart

The Glock 42 is a popular subcompact pistol that is known for its reliability and ease of use. However, like any firearm, it is important to know how to properly disassemble it for cleaning and maintenance. In this article, we will walk you through the steps of taking a Glock 42 apart, step-by-step. We will also provide some tips on how to safely and effectively clean your Glock 42.

Before you begin, make sure that you have the following:

  • A clean, dry work surface
  • A set of Glock-specific tools
  • A Glock 42 owner’s manual

Step 1: Remove the magazine

The first step is to remove the magazine from the pistol. To do this, simply press the magazine release button located at the bottom of the grip, and then pull the magazine out of the pistol.

Step 2: Lock the slide back

The next step is to lock the slide back. To do this, grasp the slide with both hands and pull it back until it stops. A small lever on the left side of the slide will engage, locking it in place.

Step 3: Remove the slide stop lever

The slide stop lever is a small lever located on the left side of the frame, just below the slide. To remove it, use a small punch or screwdriver to depress the small button on the top of the lever. Once the button is depressed, the lever can be lifted up and removed.

Step 4: Remove the slide

Now that the slide stop lever is removed, you can remove the slide from the frame. To do this, simply grasp the slide with both hands and pull it forward and off of the frame.

Step 5: Remove the recoil spring assembly

The recoil spring assembly is a small metal spring located inside the rear of the slide. To remove it, use a small punch or screwdriver to depress the small plunger located at the bottom of the spring. Once the plunger is depressed, the spring can be lifted up and removed.

Step 6: Remove the barrel

The barrel is a long, cylindrical metal tube that is located inside the slide. To remove it, simply grasp the barrel with both hands and pull it out of the slide.

Step 7: Reassemble the Glock 42

To reassemble the Glock 42, simply reverse the steps that you took to disassemble it. Be sure to lubricate all of the moving parts with a light coat of gun oil before reassembling the pistol.

Taking a Glock 42 apart is a relatively simple process, but it is important to follow the steps carefully in order to avoid damage to the pistol. By following the steps in this article, you can safely and effectively disassemble and reassemble your Glock 42.

Step Instructions Image
1 Remove the magazine.
2 Depress the slide lock and pull the slide back until it stops.
3 Rotate the takedown lever down and forward.
4 Remove the slide from the frame.
5 To reassemble, reverse the steps above.

How to Take Glock 42 Apart?

This guide will show you how to safely disassemble your Glock 42 pistol. It is important to follow all of the steps in this guide carefully to avoid damaging your firearm.

Safety Precautions

  • Before you begin, make sure that the firearm is unloaded and that the magazine is removed.
  • Keep the muzzle pointed in a safe direction at all times.
  • Wear eye protection.
  • If you are not comfortable with disassembling your firearm, take it to a qualified gunsmith.

Disassembly Steps

1. Remove the magazine.
2. Press the slide release and lock the slide back.
3. Use a Glock tool or a small screwdriver to depress the trigger bar safety lever.
4. While depressing the trigger bar safety lever, pull the trigger.
5. The slide will now be free to move forward.
6. Remove the slide from the frame.
7. Remove the recoil spring assembly from the slide.
8. Remove the barrel from the slide.

Reassembly Steps

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Align the slide rails with the frame rails and slide the slide onto the frame.
4. Press down on the slide release to release the slide.
5. Insert the magazine.

Disassembling and reassembling your Glock 42 pistol is a relatively simple process. However, it is important to follow all of the steps in this guide carefully to avoid damaging your firearm. If you are not comfortable with disassembling your firearm, take it to a qualified gunsmith.

Here are some additional resources that you may find helpful:

  • [Glock’s official disassembly and reassembly instructions](https://us.glock.com/en/learn/take-down-and-cleaning)
  • [A video tutorial on how to disassemble and reassemble a Glock 42](https://www.youtube.com/watch?v=46_9059915U)

Disassembly Steps

To disassemble your Glock 42, you will need the following tools:

  • A Glock Armorer’s Tool or a small punch
  • A cleaning rod or dowel rod
  • A soft cloth

1. Remove the magazine from the gun.
2. Lock the slide back by pulling back on the slide stop lever and then releasing it.
3. Insert the Glock Armorer’s Tool or a small punch into the hole in the rear of the slide, just above the trigger.
4. Push the tool in until it engages the slide stop lever.
5. Use the cleaning rod or dowel rod to push the slide stop lever down.
6. The slide will now be free to move forward.
7. Remove the slide from the frame.
8. Remove the recoil spring assembly from the slide.
9. Remove the barrel from the slide.

Reassembly Steps

To reassemble your Glock 42, follow these steps in reverse order:

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Slide the slide onto the frame.
4. Engage the slide stop lever with the Glock Armorer’s Tool or a small punch.
5. Remove the tool from the slide.
6. Release the slide stop lever.
7. The slide should now be locked in place.
8. Insert the magazine into the gun.

Tips and Tricks

Here are a few tips and tricks for disassembling and reassembling your Glock 42:

  • Be careful not to lose any small parts, such as the spring or the firing pin.
  • Make sure that the slide is completely locked back before you remove it from the frame.
  • When reassembling the slide, be sure to align the notch in the slide with the pin in the frame.
  • Do not force anything if it does not seem to be going together correctly.
  • If you are having trouble, consult the owner’s manual or a qualified gunsmith.

Disassembling and reassembling your Glock 42 is a relatively simple process. By following these steps, you can safely and effectively maintain your firearm.

How To Take Glock 42 Apart?

Q: What tools do I need to take apart my Glock 42?

A: You will need the following tools:

  • A Glock disassembly tool
  • A small flathead screwdriver
  • A small punch
  • A cleaning cloth

Q: How do I disassemble my Glock 42?

1. Remove the magazine from the gun.
2. Depress the slide lock and pull the slide back until it is in the locked position.
3. Insert the Glock disassembly tool into the hole in the rear of the slide.
4. Turn the disassembly tool clockwise until the slide stop pin is released.
5. Remove the slide stop pin and slide stop.
6. Pull the slide forward off the frame.
7. Remove the recoil spring assembly from the barrel.
8. Remove the barrel from the slide.

Q: How do I reassemble my Glock 42?

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the barrel.
3. Insert the slide stop pin into the slide.
4. Turn the disassembly tool counterclockwise until the slide stop pin is fully seated.
5. Press the slide forward onto the frame until it is in the locked position.
6. Insert the magazine into the gun.

Q: What are some common problems with Glock 42s?

  • Failure to eject: This can be caused by a dirty or damaged extractor, a weak recoil spring, or a misaligned barrel.
  • Failure to feed: This can be caused by a dirty or damaged magazine, a weak magazine spring, or a misaligned magazine.
  • Trigger pull: The trigger pull on a Glock 42 is typically around 5.5 pounds. If the trigger pull is too heavy or too light, it can be adjusted by a qualified gunsmith.

Q: How can I prevent problems with my Glock 42?

  • Keep your Glock 42 clean and lubricated.
  • Use quality ammunition.
  • Practice regularly.
  • Have your Glock 42 inspected and serviced by a qualified gunsmith every year.

Q: Where can I find more information about Glock 42s?

  • The Glock website: [https://us.glock.com/](https://us.glock.com/)
  • The Glock forums: [https://forums.glock.com/](https://forums.glock.com/)
  • The Glock Owners’ Manual: [https://us.glock.com/documents/ownersmanual/GLOCK_42_OwnersManual.pdf](https://us.glock.com/documents/ownersmanual/GLOCK_42_OwnersManual.pdf)

    In this comprehensive guide, we have discussed how to take Glock 42 apart. We started by discussing the tools and materials you will need. Then, we walked you through the step-by-step process of disassembly. Finally, we provided some tips and tricks to help you safely and effectively take your Glock 42 apart.

We hope that this guide has been helpful. If you have any questions, please feel free to leave them in the comments below.

Here are some key takeaways from this guide:

  • Always use the proper tools and safety gear when disassembling your Glock 42.
  • Follow the step-by-step instructions carefully to avoid damaging your firearm.
  • Be sure to reassemble your Glock 42 in the same order that you disassembled it.
  • If you are ever unsure about how to disassemble your Glock 42, consult with a qualified gunsmith.

Similar Posts