How To Take Apart A Glock 17?

ByBuffalo Rifles Blog

How to Take Apart a Glock 17

The Glock 17 is a popular handgun that is known for its reliability and ease of use. However, even the most basic of tasks, such as taking the gun apart for cleaning or maintenance, can be daunting for new gun owners.

In this article, we will walk you through the process of taking apart a Glock 17 step-by-step. We will provide detailed instructions and images to help you understand the process and ensure that you do it correctly.

By the end of this article, you will be able to disassemble and reassemble your Glock 17 with confidence.

Note: This article is intended for informational purposes only. Please consult with a qualified gunsmith if you have any questions or concerns about disassembling your Glock 17.

Step Instructions Image
1 Ensure the Glock 17 is unloaded.
2 Press the slide release lever down and pull the slide back until it stops.
3 Grasp the front of the slide and pull it straight up and off of the frame.
4 Remove the recoil spring assembly by depressing the spring plunger and pulling the spring and guide rod out of the slide.
5 Remove the barrel by pulling it straight out of the slide.

How To Take Apart A Glock 17?

Safety Precautions

Before you begin disassembling your Glock 17, it is important to take some safety precautions.

  • Make sure the gun is unloaded. Check the chamber to ensure that there is no round in the gun.
  • Clear the magazine. Remove the magazine from the gun and visually inspect it to make sure that there are no rounds in it.
  • Lock the slide back. With the magazine removed, pull the slide back and hold it in place with the slide lock. This will prevent the gun from firing accidentally.

Disassembling the Slide

To disassemble the slide, you will need a Glock tool or a small punch.

1. With the slide locked back, insert the Glock tool or punch into the hole in the rear of the slide.
2. Push the tool or punch in until it engages the slide release lever.
3. While holding the tool or punch in place, release the slide lock. The slide will come off of the frame.

Removing the Barrel

To remove the barrel, you will need to first remove the slide from the frame. Once the slide is removed, you can follow these steps to remove the barrel:

1. Rotate the barrel so that the locking lugs are aligned with the ejection port.
2. Push down on the barrel while pulling the slide forward. The barrel will come out of the slide.

Reassembling the Slide

To reassemble the slide, you will need to first insert the barrel into the slide. Once the barrel is in place, you can follow these steps to reassemble the slide:

1. Align the locking lugs on the barrel with the ejection port.
2. Push the slide forward until it locks into place.
3. Release the slide lock.

Disassembling and reassembling your Glock 17 is a relatively simple process. By following these steps, you can safely and easily maintain your firearm.

Here are some additional tips for disassembling and reassembling your Glock 17:

  • Be careful not to drop any small parts. The small parts in a Glock 17 can be easily lost, so it is important to be careful not to drop them.
  • Use a clean cloth to wipe down the parts of the gun as you disassemble it. This will help to prevent dirt and debris from getting into the gun.
  • When reassembling the gun, make sure that all of the parts are properly aligned. If the parts are not properly aligned, the gun may not function properly.

By following these tips, you can safely and easily disassemble and reassemble your Glock 17.

Disassembling the Frame

To disassemble the frame of a Glock 17, you will need the following tools:

  • A Glock disassembly tool
  • A flathead screwdriver
  • A small punch

1. Remove the magazine from the pistol.
2. Depress the slide lock lever and pull the slide back until it is in the locked position.
3. Use the Glock disassembly tool to push the takedown lever down and to the left.
4. While holding the takedown lever down, use the flathead screwdriver to pry the slide release off of the frame.
5. Remove the slide from the frame.
6. Use the small punch to push out the trigger pin.
7. Remove the trigger assembly from the frame.
8. Use the small punch to push out the safety pin.
9. Remove the safety lever from the frame.
10. Use the small punch to push out the magazine catch pin.
11. Remove the magazine catch from the frame.

The frame is now disassembled.

Reassembling the Glock 17

To reassemble the frame of a Glock 17, you will need the following tools:

  • A Glock disassembly tool
  • A flathead screwdriver
  • A small punch

1. Insert the magazine catch into the frame.
2. Use the small punch to push in the magazine catch pin.
3. Insert the safety lever into the frame.
4. Use the small punch to push in the safety pin.
5. Insert the trigger assembly into the frame.
6. Use the small punch to push in the trigger pin.
7. Insert the slide release onto the frame.
8. Use the Glock disassembly tool to push the takedown lever up and to the right.
9. Slide the slide onto the frame.
10. Depress the slide lock lever and pull the slide back until it is in the locked position.
11. Release the slide lock lever.

The frame is now reassembled.

This guide has provided you with the steps on how to disassemble and reassemble the frame of a Glock 17. Please note that this guide is for informational purposes only and should not be used as a substitute for professional advice. If you have any questions about how to disassemble or reassemble your Glock 17, please consult with a qualified gunsmith.

How to Take Apart a Glock 17?

1. Ensure the firearm is unloaded. Check the chamber to make sure there is no round in the gun.
2. Press the slide lock lever down and pull the slide back to its full rearward position.
3. Using your thumb, push down on the disassembly lever located on the left side of the frame.
4. While holding the disassembly lever down, release the slide and allow it to move forward.
5. The slide will now be separated from the frame.
6. To remove the barrel, grasp the front of the barrel and pull it out of the slide.
7. To reassemble the Glock 17, reverse the steps above.

Additional Tips:

  • When disassembling the Glock 17, be careful not to lose the small parts, such as the firing pin spring and the extractor.
  • It is a good idea to lubricate the Glock 17 with a light coat of oil after reassembly.
  • If you are not comfortable disassembling the Glock 17, take it to a qualified gunsmith.

Here are some common problems people have when taking apart a Glock 17:

  • The slide is stuck. If the slide is stuck, try tapping it lightly on the side with a rubber mallet. You can also try using a Glock disassembly tool to help release the slide.
  • The firing pin spring is stuck. If the firing pin spring is stuck, try using a small screwdriver to gently pry it out of place.
  • The extractor is stuck. If the extractor is stuck, try using a small pick to gently pry it out of place.

If you are having trouble disassembling your Glock 17, take it to a qualified gunsmith.

References:

  • [Glock’s Official Website](https://www.glock.com/)
  • [How to Take Apart a Glock 17](https://www.wikihow.com/Take-Apart-a-Glock-17)

    In this comprehensive guide, we have discussed in detail the steps involved in taking apart a Glock 17 pistol. We have also provided tips and advice on how to safely and effectively perform this task. By following the steps outlined in this guide, you can safely and easily disassemble your Glock 17 pistol for cleaning, maintenance, or repairs.

Here are the key takeaways from this guide:

  • Always wear eye protection when disassembling a Glock 17 pistol.
  • Keep the slide and barrel pointed in a safe direction at all times.
  • Do not use excessive force when disassembling the pistol.
  • If you are unsure of how to disassemble the pistol, consult the owner’s manual or a qualified gunsmith.

Similar Posts