How To Sight In A 350 Legend Rifle?

How to Sight In a 350 Legend Rifle

The 350 Legend is a relatively new cartridge that has quickly gained popularity among hunters and shooters alike. It’s a great choice for small game and deer hunting, and it’s also relatively affordable. But before you can take your 350 Legend rifle out hunting, you need to sight it in.

Sighting in a rifle is the process of adjusting the sights so that the rifle shoots where you aim it. It’s a relatively simple process, but it’s important to do it correctly so that you can be confident in your shots.

In this article, we’ll walk you through the process of sighting in a 350 Legend rifle. We’ll cover everything from choosing the right sights to making the necessary adjustments. So if you’re ready to start taking your 350 Legend rifle out hunting, read on!

Step	Instructions	Image
1	Mount the rifle in a vise or rest.
2	Attach the scope to the rifle.
3	Boresight the scope.
4	Adjust the scope’s windage and elevation turrets.
5	Fire a group of shots at 100 yards.
6	Adjust the scope’s turrets until the group is centered on the target.
7	Repeat steps 5 and 6 until the group is consistently centered on the target.

Choosing the Right Scope for Your Rifle (350 Legend)

The 350 Legend is a relatively new cartridge, so there aren’t as many scopes specifically designed for it as there are for other cartridges. However, there are still a few good options available.

When choosing a scope for your 350 Legend rifle, there are a few things you need to keep in mind.

1. Magnification

The amount of magnification you need will depend on the type of shooting you plan on doing. If you’re just going to be hunting deer or other small game within 200 yards, a scope with a magnification range of 2-7x or 3-9x will be sufficient. If you plan on shooting at longer ranges, you’ll need a scope with a higher magnification, such as 4-12x or 6-18x.

2. Objective Lens Diameter

The objective lens diameter is the size of the lens at the front of the scope. A larger objective lens will gather more light, which can be helpful in low-light conditions. However, a larger objective lens will also make the scope heavier and more bulky. For a 350 Legend rifle, a good objective lens diameter range is 24-32mm.

3. Eye Relief

Eye relief is the distance between the eyepiece of the scope and your eye when you’re looking through it. A scope with good eye relief will allow you to see the entire field of view without having to strain your eyes. For a 350 Legend rifle, a good eye relief range is 3-4 inches.

4. Turrets

The turrets on a scope allow you to make adjustments to the point of impact of your shots. There are two types of turrets: windage turrets and elevation turrets. Windage turrets allow you to adjust for the wind, and elevation turrets allow you to adjust for the range of your shots.

5. Reticle

The reticle is the crosshairs or other aiming system in the center of the scope. There are many different types of reticles available, each with its own advantages and disadvantages. For a 350 Legend rifle, a good reticle option is a duplex reticle. A duplex reticle has a thick center post that helps you to aim at close targets, and a thinner outer ring that helps you to make accurate shots at longer ranges.

6. Price

The price of a scope can vary greatly, from a few hundred dollars to several thousand dollars. The price of a scope will depend on the features it offers, such as the magnification range, objective lens diameter, eye relief, turrets, reticle, and construction materials.

7. Brand

There are many different brands of scopes available on the market. Some of the most popular brands for 350 Legend rifles include Vortex, Leupold, and Nikon.

8. Reviews

Before you buy a scope, it’s a good idea to read some reviews to see what other people have to say about it. You can find reviews online, in magazines, and in sporting goods stores.

Choosing the right scope for your 350 Legend rifle can be a challenge, but it’s important to take the time to do your research so that you get a scope that meets your needs. By considering the factors listed above, you can narrow down your choices and find a scope that will help you to shoot your 350 Legend rifle accurately and effectively.

Mounting the Scope on Your Rifle (350 Legend)

Once you’ve chosen a scope for your 350 Legend rifle, it’s time to mount it. Mounting a scope is a relatively simple process, but it’s important to do it correctly so that the scope is properly aligned and secure.

1. Gather your tools

To mount a scope on your rifle, you’ll need the following tools:

• A scope mounting kit
• A screwdriver
• A torque wrench
• A level

2. Choose the correct rings

The first step is to choose the correct scope rings for your rifle. Scope rings come in a variety of sizes and styles, so it’s important to choose the right ones for your rifle.

The most important thing to consider when choosing scope rings is the diameter of the scope tube. The scope tube diameter is the inside diameter of the rings, and it should match the outside diameter of the scope tube.

You also need to consider the height of the scope rings. The height of the rings will determine how far the scope sits above the receiver of the

3. Zeroing the Scope on Your Rifle (350 Legend)

Once you have mounted your scope and made sure that it is properly aligned with the bore of your rifle, you will need to zero it. This means that you will need to adjust the scope so that the point of impact of the bullet matches the point of aim at a specific distance.

To zero your scope, you will need to shoot a group of three shots at a target that is 100 yards away. Once you have fired your shots, you will need to adjust the scope’s windage and elevation turrets so that the point of impact of the bullet is at the center of the target.

Here are the steps on how to zero your scope:

1. Place your target at a distance of 100 yards.
2. Mount your rifle on a solid rest.
3. Load your rifle with three rounds of ammunition.
4. Aim at the center of the target and fire.
5. Observe where the bullet hit the target.
6. If the bullet is high, adjust the elevation turret down.
7. If the bullet is low, adjust the elevation turret up.
8. Repeat steps 4-7 until the point of impact of the bullet is at the center of the target.

Once you have zeroed your scope, you will need to shoot another group of three shots to verify your zero. If the point of impact of the bullet is still at the center of the target, then your scope is properly zeroed.

4. Shooting Groups to Verify Your Zero (350 Legend)

After you have zeroed your scope, you will need to shoot a group of three shots to verify your zero. This will help you to make sure that your scope is still properly zeroed and that the point of impact of the bullet is still at the center of the target.

To shoot a group of three shots, you will need to follow these steps:

1. Place your target at a distance of 100 yards.
2. Mount your rifle on a solid rest.
3. Load your rifle with three rounds of ammunition.
4. Aim at the center of the target and fire.
5. Observe where the bullet hit the target.
6. Repeat steps 4-5 until you have fired three shots.

Once you have fired three shots, you will need to measure the distance between the three bullet holes. If the distance between the three bullet holes is less than 1 inch, then your scope is still properly zeroed. If the distance between the three bullet holes is more than 1 inch, then you will need to adjust your scope’s windage and elevation turrets until the point of impact of the bullet is at the center of the target.

It is important to verify your zero after you have zeroed your scope and after you have made any changes to your scope’s windage and elevation turrets. This will help you to make sure that your scope is always properly zeroed and that you are hitting your target.

Q: What is the best way to sight in a 350 Legend rifle?

A: The best way to sight in a 350 Legend rifle is to use a 25-yard zero. This will give you a good starting point for hunting and target shooting. To sight in your rifle, you will need a rifle rest, a target, and some ammunition.

1. Set up your rifle on a rifle rest at a distance of 25 yards from the target.
2. Load your rifle with ammunition of the same grain weight that you will be using for hunting or target shooting.
3. Aim at the center of the target and fire a shot.
4. Make adjustments to your rifle’s sights until the next shot hits the center of the target.
5. Repeat steps 3 and 4 until you are able to consistently hit the center of the target.

Once you have sighted in your rifle, you can take it out hunting or to the range and enjoy shooting it.

Q: What are the different types of sights that can be used on a 350 Legend rifle?

A: There are a variety of sights that can be used on a 350 Legend rifle, including iron sights, scope sights, and red dot sights.

• Iron sights are the most basic type of sights and are typically included with a new rifle. They consist of a front sight post and a rear sight aperture.
• Scope sights offer a more precise aiming point than iron sights and are often used for hunting and long-range shooting. They consist of a magnified lens and a reticle.
• Red dot sights are a type of scope sight that projects a red dot onto the target, making it easier to aim. They are often used for close-range shooting.

The type of sight that you choose for your 350 Legend rifle will depend on your intended use for the rifle.

Q: How do I adjust the sights on my 350 Legend rifle?

A: To adjust the sights on your 350 Legend rifle, you will need to use a screwdriver or other tool to turn the adjustment screws. The adjustment screws are located on the front and rear sights.

• To adjust the windage, turn the adjustment screw on the rear sight. Turning the screw clockwise will move the point of impact to the right, and turning the screw counterclockwise will move the point of impact to the left.
• To adjust the elevation, turn the adjustment screw on the front sight. Turning the screw clockwise will move the point of impact up, and turning the screw counterclockwise will move the point of impact down.

Once you have made the necessary adjustments, you can re-sight in your rifle.

Q: How do I know if my rifle is sighted in correctly?

A: You can check to see if your rifle is sighted in correctly by firing a few shots at a target at a known distance. If the shots are grouped together in the center of the target, then your rifle is sighted in correctly. If the shots are not grouped together, then you will need to adjust the sights.

You can also use a laser bore sight to check if your rifle is sighted in correctly. A laser bore sight is a device that projects a laser beam down the barrel of your rifle. You can use the laser beam to align the sights with the bore of the rifle.

If you are not sure if your rifle is sighted in correctly, you can take it to a gunsmith for a professional inspection.

Q: What are some common problems that can occur when sighting in a 350 Legend rifle?

A: There are a few common problems that can occur when sighting in a 350 Legend rifle. These include:

• Improper sight alignment: If the sights are not aligned properly, the rifle will not shoot where you are aiming.
• Improper sight adjustment: If the sights are not adjusted properly, the rifle will not shoot where you are aiming.
• Inconsistent ammunition: If you are using different types of ammunition, the rifle may not shoot consistently.
• Weather conditions: Wind, rain, and other weather conditions can affect the accuracy of your rifle.

If you are experiencing any of these problems, you can try to correct them by following the instructions in the owner’s manual for your rifle. If you are unable to correct the problem, you may need to take your rifle to a gunsmith for

sighting in a 350 Legend rifle is a relatively simple process that can be completed in a few steps. By following the steps outlined in this article, you can be sure that your rifle will be accurately zeroed for your desired range, making it an effective hunting tool.

Here are the key takeaways from this article:

• The 350 Legend is a versatile cartridge that is well-suited for hunting a variety of game.
• To sight in a 350 Legend rifle, you will need a riflescope, a few rounds of ammunition, and a target.
• The first step is to mount the riflescope to the rifle.
• The second step is to zero the riflescope at 100 yards.
• The third step is to confirm the zero at 200 yards.
• By following these steps, you can be sure that your 350 Legend rifle will be accurately zeroed for your desired range.