How to Refinish a Gun Stock for a Professional Look

How to Restain a Gun Stock

Your gun stock is one of the most important parts of your firearm. It protects the action from the elements and provides a comfortable grip for shooting. But over time, the stock can become worn and damaged, and its finish can fade. If you want to keep your gun looking its best, you’ll need to restain the stock.

Restaining a gun stock is a relatively simple process, but it does require some care and attention to detail. In this article, we’ll walk you through the steps of restaining a gun stock, from preparing the stock to applying the new finish.

We’ll also provide tips on choosing the right stain for your gun and how to maintain your new finish. So whether you’re looking to give your old gun a new lease on life or you’re simply looking to keep your gun looking its best, read on for all the information you need to know about restaining a gun stock.

Step	Instructions	Image
1	Remove the old finish from the stock.
2	Sand the stock smooth.
3	Apply a coat of stain.
4	Allow the stain to dry completely.
5	Apply a coat of varnish.
6	Allow the varnish to dry completely.

How to Refinish a Gun Stock

A gun stock is the part of a firearm that is held by the shooter. It is typically made of wood, but it can also be made of other materials, such as plastic or metal. The stock is responsible for providing a comfortable grip for the shooter and for absorbing recoil.

Over time, the finish on a gun stock can wear off or become damaged. This can make the stock look unsightly and can also make it more difficult to hold the gun properly. If you want to restore your gun stock to its original condition, you can refinish it.

Refinishing a gun stock is a relatively simple process, but it does require some time and effort. In this guide, we will walk you through the steps of refinishing a gun stock.

Preparing the Stock

The first step in refinishing a gun stock is to prepare it. This involves removing the stock from the gun, sanding the stock to remove any old finish, and applying a degreaser to the stock.

To remove the stock from the gun, you will need to find the two screws that hold the stock in place. These screws are usually located on the bottom of the stock, near the trigger guard. Once you have found the screws, use a screwdriver to remove them.

Once the stock is removed from the gun, you can begin sanding it. You will need to use a fine-grit sandpaper to remove any old finish that is still on the stock. Be sure to sand in the direction of the grain.

After you have sanded the stock, you will need to apply a degreaser to it. This will help to remove any dirt or oil that is on the stock. You can use a commercial degreaser or you can make your own degreaser by mixing equal parts of vinegar and water.

Once you have applied the degreaser, you will need to wipe down the stock with a clean cloth. This will remove any residual degreaser and will help to prepare the stock for the next step.

Applying the Stain

The next step in refinishing a gun stock is to apply the stain. You will need to choose a stain that is compatible with the type of wood used in the stock. You can find a variety of stains at your local hardware store.

To apply the stain, you will need to use a brush or cloth. Be sure to apply the stain evenly and to work in the direction of the grain. You may need to apply more than one coat of stain to achieve the desired color.

After you have applied the stain, you will need to allow it to dry according to the manufacturer’s instructions. Once the stain is dry, you can apply a coat of sealant to protect the finish.

Refinishing a gun stock is a relatively simple process, but it does require some time and effort. By following the steps in this guide, you can restore your gun stock to its original condition.

Here are some additional tips for refinishing a gun stock:

• Use a light touch when sanding the stock. You do not want to sand through the wood.
• Be careful not to apply too much stain. This can cause the stain to run and bleed.
• Allow the stain to dry completely before applying the sealant.
• Apply the sealant in thin coats. This will help to prevent the sealant from becoming gummy.

By following these tips, you can refinish your gun stock and give it a new lease on life.

Preparing the Stock

Before you can restain a gun stock, you need to prepare the stock by removing the old finish. This can be done by sanding, stripping, or using a chemical stripper.

Sanding

To sand the stock, you will need a sanding block, sandpaper, and a tack cloth. Start with a coarse grit sandpaper (80-120 grit) and work your way up to a finer grit (220-320 grit). Sand the stock in the direction of the grain, and be careful not to sand through the wood.

Stripping

If you do not want to sand the stock, you can use a chemical stripper to remove the old finish. Chemical strippers are available at most hardware stores. Follow the directions on the product label carefully.

Chemical Stripper

Chemical strippers are a quick and easy way to remove old finishes, but they can be harmful if not used properly. Wear gloves and eye protection when using a chemical stripper, and work in a well-ventilated area.

Apply the stripper to the stock and let it sit for the amount of time specified on the product label.

Use a scraper or putty knife to remove the softened finish.

Wipe the stock with a damp cloth to remove any remaining stripper residue.

Tack cloth the stock to remove any dust or debris.

Restaining the Stock

Once the stock is prepared, you can begin the restaining process. You will need a wood stain, a brush, and a rag.

Choose a wood stain that is compatible with the type of wood your stock is made of.

Apply the stain to the stock with a brush, and work it into the wood with the grain.

Allow the stain to dry for the amount of time specified on the product label.

Apply a second coat of stain, if desired.

Allow the stain to dry completely before moving on to the next step.

Sealing the Stock

After the stain has dried, you need to seal the stock to protect the finish. You can use a varnish, polyurethane, or other sealant.

Apply the sealant to the stock with a brush, and work it into the wood with the grain.

Allow the sealant to dry for the amount of time specified on the product label.

Apply a second coat of sealant, if desired.

Allow the sealant to dry completely before reassembling the gun.

Reassembling the Gun

Once the sealant has dried, you can reassemble the gun.

Reattach the stock to the gun.

Test the gun to make sure it is functioning properly.

Restaining a gun stock is a relatively simple process, but it is important to follow the steps carefully to ensure that the finish is properly applied and protected. By following these steps, you can restore your gun stock to its former glory.

How do I prepare a gun stock for refinishing?

1. Remove all hardware from the stock, including the barrel, action, and any other metal parts.
2. Clean the stock with a mild solvent, such as mineral spirits or acetone.
3. Sand the stock with a fine-grit sandpaper (120-grit or higher) until the surface is smooth and free of any defects.
4. Wipe the stock down with a tack cloth to remove any dust or debris.

What type of stain should I use on a gun stock?

The type of stain you use will depend on the type of wood the stock is made from. Some common stains for gun stocks include:

• Oil-based stains: These stains are easy to apply and produce a deep, rich color. However, they can be difficult to remove if you make a mistake.
• Water-based stains: These stains are easier to apply than oil-based stains and can be removed more easily if you make a mistake. However, they may not produce as deep a color as oil-based stains.
• Solvent-based stains: These stains are the most difficult to apply, but they produce the deepest color. However, they can also be the most difficult to remove.

How do I apply stain to a gun stock?

1. Apply a thin coat of stain to the stock with a rag or brush.
2. Allow the stain to dry for the amount of time specified on the product label.
3. Apply additional coats of stain, if desired, until you achieve the desired color.
4. Allow the stain to dry completely before moving on to the next step.

How do I protect the finish on my gun stock?

Once you have finished staining your gun stock, you will need to protect the finish to prevent it from wearing off. You can do this by applying a coat of sealant, such as polyurethane or varnish.

How do I repair a damaged gun stock?

If your gun stock is damaged, you can repair it by following these steps:

1. Remove all hardware from the stock.
2. Clean the stock with a mild solvent, such as mineral spirits or acetone.
3. Sand the damaged area with a fine-grit sandpaper (120-grit or higher) until the surface is smooth.
4. Apply a wood filler to the damaged area and allow it to dry completely.
5. Sand the filler smooth with a fine-grit sandpaper.
6. Apply a coat of stain to the stock and allow it to dry completely.
7. Apply a coat of sealant to the stock and allow it to dry completely.

How do I prevent my gun stock from cracking?

You can prevent your gun stock from cracking by following these tips:

• Store your gun in a cool, dry place.
• Avoid exposing your gun to extreme temperatures.
• Do not drop your gun.
• Do not over-tighten the screws on your gun.
• Apply a coat of sealant to the stock to protect it from moisture.

  Refinishing a gun stock is a relatively simple process, but it is important to follow the steps carefully to ensure that the finished product is both beautiful and durable. By using the right materials and techniques, you can restore your gun stock to its former glory and give it a new lease on life.

Here are the key takeaways from this article:

• The first step is to remove the old finish from the stock. This can be done using a variety of methods, such as sanding, chemical stripping, or heat.
• Once the old finish is removed, you will need to sand the stock to smooth out any rough spots.
• Next, you will need to apply a primer to the stock. This will help the stain to adhere better.
• Finally, you can apply the stain of your choice. Allow the stain to dry completely before applying a coat of varnish or polyurethane.

By following these steps, you can easily refinish your gun stock and give it a new look that will last for years to come.