How To Remove Glock Mag Release?

How to Remove a Glock Magazine Release

The Glock magazine release is a small, but important, part of your Glock pistol. It’s responsible for releasing the magazine from the gun, so it’s important to know how to remove it if you need to replace it or clean it.

In this article, we’ll show you how to remove the magazine release on a Glock pistol. We’ll provide step-by-step instructions, along with photos and diagrams. We’ll also discuss some of the common problems that you might encounter when removing the magazine release, and how to fix them.

So if you’re ready to learn how to remove a Glock magazine release, read on!

Step	Instructions	Image
1	Depress the slide lock lever and pull the slide back about 1/2 inch.
2	Use a small punch or screwdriver to push the pin out of the mag release.
3	Pull the mag release out of the gun.

How to Remove Glock Mag Release?

This guide will show you how to remove the magazine release on a Glock pistol. The magazine release is a small, rectangular button located on the left side of the frame, just below the trigger guard. It is used to release the magazine from the gun.

Tools Needed:

• A small flathead screwdriver
• A small punch or nail
• A piece of cloth

Safety Precautions:

• Before you begin, make sure the gun is unloaded.
• Keep the gun pointed in a safe direction at all times.
• Wear eye protection.

Step 1: Remove the slide stop.

The slide stop is a small lever located on the left side of the frame, just above the magazine release. To remove it, use a small flathead screwdriver to pry up on the tab on the back of the slide stop. Once the tab is released, the slide stop can be pulled out of the frame.

Step 2: Remove the magazine catch spring.

The magazine catch spring is a small, curved spring located behind the magazine release. To remove it, use a small punch or nail to push it out of the frame.

Step 3: Remove the magazine release.

The magazine release is now held in place by a small pin. To remove it, use a small punch or nail to push the pin out of the frame. The magazine release can then be lifted up and removed.

Step 4: Reinstall the magazine release.

To reinstall the magazine release, insert it into the frame and push it down until it is seated. Replace the pin and the slide stop.

:

Reinstalling the magazine release is the reverse of removing it. Be sure to follow the steps carefully to avoid damaging the gun.

Here are some additional tips for removing the magazine release on a Glock pistol:

• If the magazine release is stuck, you can try applying a little bit of lubricant to the release button.
• If the magazine release is still stuck, you can try using a small hammer to tap on the release button.
• If you are unable to remove the magazine release, you can take the gun to a gunsmith for assistance.

3. Steps to Remove the Mag Release

To remove the magazine release on a Glock pistol, you will need the following tools:

• A Glock Armorer’s Tool or a small punch
• A flathead screwdriver
• A small piece of cloth

1. Remove the slide from the frame.
2. Locate the magazine release lever on the left side of the frame.
3. Insert the tip of the Glock Armorer’s Tool or a small punch into the hole in the magazine release lever.
4. Push the magazine release lever down and to the right.
5. Use the flathead screwdriver to pry the magazine release lever out of the frame.
6. Use the small piece of cloth to clean any debris from the magazine release lever.

4. Reassembly

To reassemble the magazine release on a Glock pistol, follow these steps:

1. Insert the magazine release lever into the frame.
2. Use the flathead screwdriver to push the magazine release lever up and into place.
3. Use the Glock Armorer’s Tool or a small punch to push the magazine release lever down and to the left.
4. Replace the slide on the frame.

Removing and replacing the magazine release on a Glock pistol is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your Glock pistol is properly maintained and functioning properly.

How do I remove the Glock mag release?

1. Depress the magazine release button. This will release the magazine from the gun.
2. Grasp the magazine release with a pair of pliers.
3. Turn the magazine release counterclockwise until it is removed from the gun.

What tools do I need to remove the Glock mag release?

You will need a pair of pliers to remove the Glock mag release.

Can I remove the Glock mag release without tools?

It is possible to remove the Glock mag release without tools, but it is difficult and not recommended. If you do not have a pair of pliers, you can try using a small screwdriver or a coin to turn the magazine release counterclockwise. However, this is more likely to damage the magazine release than if you use a pair of pliers.

What happens if I drop my Glock mag release?

If you drop your Glock mag release, it is possible that it will become damaged. If the magazine release is damaged, it may not function properly and you may not be able to release the magazine from the gun.

How do I put the Glock mag release back in?

To put the Glock mag release back in, follow these steps:

1. Align the magazine release with the slot in the gun.
2. Push the magazine release into the gun until it is flush with the frame.
3. Depress the magazine release button to make sure that it is properly seated.

What if the Glock mag release is stuck?

If the Glock mag release is stuck, you can try the following:

1. Apply a small amount of lubricant to the magazine release.
2. Try to turn the magazine release counterclockwise with a pair of pliers.
3. If the magazine release is still stuck, you may need to take the gun to a gunsmith.

Is it possible to damage the Glock mag release by removing it?

It is possible to damage the Glock mag release by removing it. If you are not careful, you could damage the magazine release or the gun itself. It is always best to consult with a qualified gunsmith if you are unsure how to remove the magazine release.

removing the Glock mag release is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can safely and effectively remove the mag release from your Glock pistol. However, it is important to note that this guide is intended for informational purposes only. If you are not comfortable working on your Glock pistol, or if you have any questions, please consult a qualified firearms technician.