How To Remove Dust Cover Ar 15?
How to Remove the Dust Cover on an AR-15
The AR-15 is a popular rifle for both civilian and military use. It is a reliable and accurate weapon, but it can be difficult to maintain. One of the most important maintenance tasks is to clean and lubricate the rifle. In order to do this, you need to remove the dust cover. This is a simple process, but it is important to do it correctly.
In this article, we will show you how to remove the dust cover on an AR-15. We will provide step-by-step instructions and images to help you along the way. We will also discuss the importance of cleaning and lubricating your rifle, and we will provide tips on how to do it properly.
So, if you are ready to learn how to remove the dust cover on an AR-15, keep reading!
| Step | Instructions | Image |
|---|---|---|
| 1 | Depress the dust cover release button located on the rear of the receiver. |  |
| 2 | Grasp the dust cover and pull it up and off of the receiver. |  |
| 3 | To reinstall the dust cover, simply reverse the steps above. |  |
The AR-15 is a semi-automatic rifle that is popular for its accuracy, reliability, and modularity. One of the most important parts of the AR-15 is the dust cover, which helps to protect the bolt carrier group from dirt and debris. However, the dust cover can sometimes become damaged or stuck, and it may need to be removed for cleaning or maintenance.
This guide will show you how to remove the dust cover from an AR-15 rifle. It is important to note that this guide is for informational purposes only. Please consult your owner’s manual for specific instructions on how to remove the dust cover from your particular model of AR-15.
Tools and Materials Needed
- AR-15 rifle
- AR-15 dust cover removal tool
- AR-15 cleaning kit
- AR-15 manual
Steps to Remove the Dust Cover
1. First, make sure that the rifle is unloaded and safe to work on.
2. Remove the magazine from the rifle.
3. Lock the bolt back by pulling back on the charging handle and then releasing it.
4. Locate the dust cover removal tool. The dust cover removal tool is a small, metal tool that is specifically designed to remove the dust cover from an AR-15.
5. Insert the dust cover removal tool into the hole in the back of the dust cover.
6. Press down on the dust cover removal tool while simultaneously pushing up on the dust cover.
7. The dust cover should pop off of the rifle.
8. Use the cleaning kit to clean the dust cover and the area around it.
9. Reinstall the dust cover by aligning the two tabs on the dust cover with the two slots on the rifle.
10. Press down on the dust cover until it snaps into place.
Removing the dust cover from an AR-15 is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps in this guide carefully to avoid damaging the rifle. If you are unsure about how to remove the dust cover from your AR-15, please consult your owner’s manual for specific instructions.
How To Remove Dust Cover Ar 15?
1. Locate the dust cover
The dust cover is a small, rectangular flap located on the top of the AR-15 receiver. It is held in place by a spring and two small pins.
2. Remove the dust cover spring
To remove the dust cover spring, use a small flat-head screwdriver to pry up the small tabs on either side of the spring. Once the tabs are pried up, the spring can be lifted out of the receiver.
3. Remove the magazine from the rifle
Before you can remove the dust cover, you must first remove the magazine from the rifle. To do this, press the magazine release button located on the left side of the receiver. The magazine will then pop out of the rifle.
4. Lock the bolt back
To lock the bolt back, pull back on the charging handle until the bolt is fully extended. Then, release the charging handle and let the bolt go forward. The bolt will be locked back in place.
5. Remove the dust cover pins
The dust cover is held in place by two small pins. To remove the pins, use a small punch or awl to push them out of the receiver.
6. Remove the dust cover
Once the pins are removed, the dust cover can be lifted off of the receiver.
7. Reinstall the dust cover
To reinstall the dust cover, first insert the two pins into the receiver. Then, align the dust cover with the pins and snap it into place.
Removing the dust cover on an AR-15 is a simple process that can be completed in a few minutes. By following these steps, you can easily access the internal components of your rifle for cleaning or maintenance.
How do I remove the dust cover on an AR-15?
1. With the AR-15 pointed in a safe direction, depress the rear takedown pin and pull the upper receiver assembly back until it is about 45 degrees from the lower receiver.
2. Using a small flathead screwdriver, pry the dust cover catch up and out of the slot in the upper receiver.
3. The dust cover will now be free to swing open and be removed.
What tools do I need to remove the dust cover on an AR-15?
You will need a small flathead screwdriver to remove the dust cover catch.
Can I remove the dust cover on an AR-15 without tools?
It is possible to remove the dust cover on an AR-15 without tools, but it is not recommended. Using a tool will make the process much easier and less likely to damage the dust cover or the upper receiver.
What happens if I lose the dust cover for my AR-15?
If you lose the dust cover for your AR-15, it is not a major problem. The dust cover is not essential for the function of the rifle, and it can be easily replaced.
How often should I clean the dust cover on my AR-15?
The dust cover on an AR-15 does not need to be cleaned very often. It is only necessary to clean the dust cover if it becomes dirty or obstructed.
Is it possible to damage the AR-15 by removing the dust cover?
It is possible to damage the AR-15 by removing the dust cover, but it is not likely. The dust cover is not a critical component of the rifle, and it can be removed and replaced without damaging the rifle.
What are the benefits of removing the dust cover on an AR-15?
There are no real benefits to removing the dust cover on an AR-15. The dust cover helps to protect the rifle from dirt and debris, and it can also help to reduce the amount of noise generated by the rifle.
In this article, we have discussed how to remove the dust cover on an AR-15. We started by identifying the parts of the dust cover and then discussing the steps involved in removing it. We also provided some tips for safely and effectively removing the dust cover.
We hope that this article has been helpful and that you now feel confident in your ability to remove the dust cover on your AR-15. As always, please be safe and use caution when working with firearms.