How To Make A Monster Can Gun?

How to Make a Monster Can Gun

Have you ever wanted to build your own monster can gun? It’s a fun and easy project that can be completed in just a few hours. With a few simple materials, you can create a unique weapon that will impress your friends and family.

In this article, we will walk you through the steps of making a monster can gun. We’ll provide detailed instructions and tips, so you can be sure that your gun is safe and effective. So what are you waiting for? Let’s get started!

Step	Materials	Instructions
1	1 empty soda can 1 plastic bottle cap 1 rubber band 1 piece of string	Cut the top off of the soda can. Cut a hole in the center of the plastic bottle cap. Thread the string through the hole in the bottle cap and tie a knot. Attach the bottle cap to the bottom of the soda can with the rubber band.
2	1 straw 1 piece of tape	Cut a straw in half. Tape the straw to the inside of the soda can, so that it is sticking out of the hole.
3	Breath into the straw to make the can gun shoot.	Have fun!

This tutorial will show you how to make a monster can gun. This is a fun and easy project that can be completed in just a few minutes. The finished product is a great way to entertain yourself or your friends.

Materials

• 2 empty soda cans
• Duct tape
• Needle and thread
• Scissors
• Hot glue gun
• Safety glasses

Instructions

1. Prepare the soda cans. Rinse the soda cans out and dry them thoroughly. Then, use a can opener to remove the top and bottom of each can.
2. Cut the duct tape into strips. You will need enough strips to wrap around the entire circumference of each can.
3. Wrap the duct tape around the cans. Start by wrapping the duct tape around the bottom of one of the cans. Then, wrap the tape around the can in a spiral, overlapping each layer of tape slightly. Continue wrapping the tape until you reach the top of the can.
4. Repeat steps 3 and 4 for the second can. Make sure that the two cans are the same size and shape.
5. Thread the needle and tie a knot. Thread the needle with a piece of thread that is long enough to go around the entire circumference of both cans. Then, tie a knot in the end of the thread.
6. Sew the two cans together. Starting at the bottom of one of the cans, sew the two cans together using a running stitch. Sew all the way around the cans, leaving a small opening at the top.
7. Hot glue the opening closed. Once you have sewn the two cans together, use a hot glue gun to seal the opening.
8. Decorate the gun. You can decorate the gun however you like. You can paint it, add stickers, or even attach streamers.

Your monster can gun is now complete! This is a great way to have some fun and entertain yourself or your friends. Be sure to use caution when playing with the gun, and never point it at anyone.

Step 3: Cut the bottom off of one of the soda cans.

Use a pair of scissors or a can opener to cut the bottom off of one of the soda cans. Be careful not to cut yourself.

Step 4: Use the duct tape to attach the two soda cans together, so that the open ends are facing each other.

Take the duct tape and wrap it around the two soda cans, so that they are attached together. Make sure that the open ends are facing each other.

Step 5: Fill the bottom soda can with water.

Use a funnel to fill the bottom soda can with water. Make sure that the water level is about halfway up the can.

Step 6: Pull the trigger.

Hold the monster can gun in one hand and the trigger in the other hand. Pull the trigger to launch the water out of the can.

Tips

• Use a thick piece of duct tape to attach the two soda cans together. This will make the gun more sturdy and less likely to break.
• Use a sharp pair of scissors or a can opener to cut the bottom off of the soda can. This will make the hole in the can larger and allow the water to flow out more easily.
• Fill the bottom soda can with enough water to make a good stream of water when you pull the trigger. If the water level is too low, the stream of water will be weak. If the water level is too high, the water will spill out of the can when you pull the trigger.
• Experiment with different ways to hold the monster can gun. You may find that holding it in a certain way makes it easier to aim and shoot.
• Have fun! Monster can guns are a great way to have some fun with your friends and family.

Making a monster can gun is a fun and easy project that can be enjoyed by people of all ages. With just a few simple materials, you can create a toy that will provide hours of entertainment. So what are you waiting for? Get started on your monster can gun today!

Q: What materials do I need to make a monster can gun?

A: You will need the following materials:

• 1 empty soda can
• 1 toilet paper roll
• 1 rubber band
• 1 piece of duct tape
• 1 wooden skewer
• 1 piece of cardboard
• 1 marker

Q: How do I make a monster can gun?

A: To make a monster can gun, follow these steps:
1. Cut the bottom off of the soda can.
2. Cut the toilet paper roll in half lengthwise.
3. Insert the toilet paper roll into the soda can, so that the open end of the roll is facing out.
4. Wrap the rubber band around the can and the toilet paper roll, so that the rubber band is tight.
5. Stick the wooden skewer through the center of the can, so that it is sticking out of the top of the can.
6. Cut a piece of cardboard to fit inside the can.
7. Draw a monster face on the cardboard.
8. Glue the cardboard inside the can.

Q: How do I use a monster can gun?

A: To use a monster can gun, hold the can in one hand and the wooden skewer in the other hand. Pull back on the wooden skewer and release it to shoot the monster can.

Q: What are some safety precautions I should take when using a monster can gun?

A: When using a monster can gun, be sure to take the following safety precautions:

• Always wear eye protection when using a monster can gun.
• Never point the gun at anyone or anything you do not intend to shoot.
• Do not shoot the gun near flammable objects.
• Do not shoot the gun in enclosed spaces.

Q: Where can I find more information about monster can guns?

A: You can find more information about monster can guns on the following websites:

• [How to Make a Monster Can Gun](https://www.instructables.com/id/How-to-Make-a-Monster-Can-Gun/)
• [Monster Can Gun Tutorial](https://www.youtube.com/watch?v=23012z54_44)
• [The Ultimate Guide to Monster Can Guns](https://www.monstercanguns.com/)

  In this tutorial, we have shown you how to make a monster can gun. We hope you enjoyed this project and found it informative. If you have any questions or comments, please feel free to leave them below. Remember to be safe and have fun!

Here are some key takeaways from this tutorial:

• Monster can guns are a fun and easy project to make.
• They are a great way to recycle old cans.
• Monster can guns are safe to use as long as you follow the instructions.
• Monster can guns can be customized to your liking.

We hope you enjoyed this tutorial and will give it a try. If you do, please share your pictures with us on social media. We would love to see what you create!