How To Make A 22 Caliber Pen Gun?

How to Make a 22 Caliber Pen Gun

In this article, I will show you how to make a 22 caliber pen gun. This is a dangerous project, and I do not recommend that you attempt it unless you are experienced with firearms and are aware of the risks involved.

A pen gun is a small, concealable firearm that is made from a pen. It is typically made from a 22 caliber bullet, a spring, and a pen body. The bullet is loaded into the pen body, and the spring is used to propel the bullet out of the pen when the trigger is pulled.

Pen guns are illegal in most countries, and for good reason. They are very dangerous and can easily be used to commit crimes. However, they are also very interesting, and I think it is important to know how they work.

In this article, I will provide you with a step-by-step guide on how to make a 22 caliber pen gun. I will also discuss the risks involved in making and using a pen gun.

Please note that I am not responsible for any injuries or damages that you may sustain as a result of attempting to make a pen gun.

Step Materials Instructions
1
  • 22 caliber barrel
  • Pen body
  • Spring
  • Screws
  • Drill
  • File
  • Superglue
  1. Cut the barrel to the desired length.
  2. Drill a hole in the pen body that is slightly larger than the diameter of the barrel.
  3. Insert the barrel into the pen body.
  4. Screw the barrel into place.
  5. File the edges of the barrel so that they are smooth.
  6. Apply superglue to the threads of the barrel and the inside of the pen body.
  7. Let the glue dry completely.
2
  • BBs
  1. Load the pen gun with BBs.
3
  • To fire the pen gun, pull the trigger.
  1. The spring will push the BB out of the barrel.

Materials and Tools

To make a 22 caliber pen gun, you will need the following materials and tools:

  • A 22 caliber rifle barrel
  • A pen body
  • A drill
  • A hacksaw
  • A file
  • A center punch
  • A hammer
  • A soldering iron
  • Solder
  • Electrical tape
  • A piece of wood
  • A nail

Building the Pen Gun

1. First, cut the rifle barrel to the desired length.
2. Next, drill a hole in the center of the pen body. The hole should be large enough to fit the rifle barrel.
3. Use the hacksaw to cut the rifle barrel to the same length as the pen body.
4. File the edges of the rifle barrel so that they are smooth.
5. Use the center punch to mark the center of the rifle barrel.
6. Hammer the nail into the center of the rifle barrel.
7. Solder the nail to the rifle barrel.
8. Wrap the electrical tape around the joint between the rifle barrel and the pen body.
9. Glue the wood to the bottom of the pen body.
10. Insert the nail into the hole in the wood.

Your pen gun is now complete.

A 22 caliber pen gun is a dangerous weapon. It is illegal to manufacture or possess a pen gun in most countries. Please use this information responsibly.

3. Testing the Pen Gun

Once you have completed your pen gun, it is important to test it to make sure that it is working properly. Here are a few things to keep in mind when testing your pen gun:

  • Use a safe location. Do not test your pen gun in a crowded area or near any people or animals.
  • Wear eye protection. A ricocheting bullet can cause serious eye damage, so it is important to wear eye protection when testing your pen gun.
  • Start with a low power load. You should start by testing your pen gun with a low power load to make sure that it is functioning properly.
  • Increase the power load gradually. Once you are sure that your pen gun is functioning properly, you can gradually increase the power load.

Here are the steps on how to test your pen gun:

1. Load the pen gun with a low power load.
2. Point the pen gun in a safe direction.
3. Pull the trigger.
4. Observe the bullet’s trajectory.
5. Repeat steps 2-4 with increasing power loads.

If the pen gun is functioning properly, the bullet should travel in a straight line and hit the target. If the bullet does not travel in a straight line or if it does not hit the target, there may be a problem with the pen gun. In this case, you should troubleshoot the problem and fix it before continuing to test the pen gun.

4. Safety Precautions

It is important to take precautions when making and using a pen gun. Here are a few safety tips to keep in mind:

  • Never point the pen gun at anyone or anything you do not intend to shoot. A ricocheting bullet can cause serious injury or death, so it is important to always be aware of the direction you are pointing the pen gun.
  • Use only high-quality ammunition. Using low-quality ammunition can damage the pen gun and may cause it to malfunction.
  • Store the pen gun in a safe place. The pen gun should be stored in a locked container when it is not in use.
  • Never modify the pen gun. Modifying the pen gun can make it more dangerous and may void the warranty.

By following these safety precautions, you can help to reduce the risk of injury when making and using a pen gun.

In this article, we have provided instructions on how to make a 22 caliber pen gun. We have also discussed the importance of testing the pen gun and taking safety precautions. We hope that this information has been helpful.

Please note that we do not condone the illegal use of firearms. This article is for educational purposes only.

Q: How do I make a 22 caliber pen gun?

A: It is illegal to make a 22 caliber pen gun in the United States. Do not attempt to do so.

Q: What are the legal implications of making a 22 caliber pen gun?

A: It is illegal to make a 22 caliber pen gun in the United States. Federal law prohibits the manufacture of any firearm without a serial number. Pen guns are considered firearms under federal law.

Q: What are the safety risks of making a 22 caliber pen gun?

A: Pen guns are extremely dangerous. They are often made with poor quality materials and construction, which can lead to malfunctions and injuries. Pen guns are also easy to conceal, which makes them a danger to the public.

Q: Are there any alternative ways to make a 22 caliber pen gun?

A: There are no safe or legal alternatives to making a 22 caliber pen gun. If you are interested in owning a firearm, please visit your local gun store or contact a licensed firearms dealer.

Q: I am interested in learning more about the laws regarding pen guns. Where can I find more information?

A: You can find more information about the laws regarding pen guns by visiting the following websites:

  • [U.S. Department of Justice: Bureau of Alcohol, Tobacco, Firearms, and Explosives](https://www.atf.gov/)
  • [National Rifle Association: Law Center to Protect the Second Amendment](https://www.nra.org/)
  • [The National Shooting Sports Foundation: Law Enforcement & Industry Services](https://www.nssf.org/)

    making a 22 caliber pen gun is a dangerous and illegal activity. It is important to remember that these guns are not toys and can be deadly if used improperly. If you are interested in learning more about gun safety, there are many resources available online and at your local gun store.

Similar Posts