How to Disassemble a Remington 870 for Cleaning and Maintenance

How to Disassemble a Remington 870 Shotgun

The Remington 870 is a popular pump-action shotgun that is used for hunting, self-defense, and law enforcement. It is a reliable and durable firearm, but it is important to know how to properly disassemble it for cleaning and maintenance. In this article, we will walk you through the steps of disassembling a Remington 870 shotgun.

We will provide you with clear and concise instructions, along with images to help you visualize the process. By the end of this article, you will be able to disassemble and reassemble your Remington 870 shotgun with ease.

Step	Action	Notes
1	Remove the magazine	Depress the magazine release button and pull the magazine out of the gun.
2	Remove the bolt assembly	Pull back on the bolt handle and rotate it counterclockwise until it stops. Then, pull the bolt assembly out of the gun.
3	Remove the barrel	Unscrew the barrel from the receiver.
4	Remove the forend	Unscrew the forend from the receiver.

The Remington 870 is a popular pump-action shotgun that is used for hunting, self-defense, and law enforcement. It is a reliable and easy-to-use firearm, but it is important to know how to disassemble it properly for cleaning and maintenance. This guide will walk you through the steps of disassembling the Remington 870 in a safe and efficient manner.

Safety Precautions

Before you begin disassembling the Remington 870, there are a few safety precautions that you should take:

• Wear eye protection and hearing protection. This will protect your eyes and ears from any debris or noise that may be generated during the disassembly process.
• Keep the muzzle pointed in a safe direction. This will prevent any accidental discharge of the firearm.
• Do not disassemble the firearm if it is loaded. This is a safety hazard and could result in serious injury or death.
• Follow the instructions in the owner’s manual. The owner’s manual contains important information about how to safely disassemble and reassemble the Remington 870.

Disassembling the Remington 870

To disassemble the Remington 870, you will need the following tools:

• A screwdriver
• A hammer
• A punch
• A rag

1. Remove the magazine.

To remove the magazine, depress the magazine release button located on the bottom of the receiver. The magazine will then slide out of the receiver.

2. Remove the bolt.

To remove the bolt, grasp the bolt handle and pull it to the rear. The bolt will then come out of the receiver.

3. Remove the barrel.

To remove the barrel, depress the barrel release button located on the front of the receiver. The barrel will then slide out of the receiver.

4. Remove the action assembly.

To remove the action assembly, first remove the bolt from the receiver. Then, remove the magazine tube from the receiver. Finally, remove the action assembly from the receiver.

Reassembling the Remington 870

To reassemble the Remington 870, follow these steps in reverse order:

1. Insert the action assembly into the receiver.
2. Insert the magazine tube into the receiver.
3. Insert the bolt into the receiver.
4. Press the barrel release button to lock the barrel in place.
5. Insert the magazine.

Disassembling the Remington 870 is a simple process that can be completed in a few minutes. By following these steps, you can safely and efficiently disassemble your firearm for cleaning and maintenance.

Here are some additional tips for disassembling the Remington 870:

• If the bolt is stuck, you can try using a hammer and punch to tap it out of the receiver.
• If the magazine tube is stuck, you can try using a screwdriver to pry it loose.
• If the action assembly is stuck, you can try using a rag to apply pressure to the release button.

By following these tips, you can safely and easily disassemble your Remington 870.

How To Disassemble Remington 870?

The Remington 870 is a popular pump-action shotgun that is used for hunting, self-defense, and law enforcement. It is a reliable and durable firearm that is easy to use and maintain. However, it is important to know how to properly disassemble the Remington 870 in order to clean and maintain it.

This guide will show you how to disassemble the Remington 870 in four easy steps.

1. Remove the magazine

The first step is to remove the magazine from the Remington 870. To do this, press the magazine release button located on the bottom of the receiver. The magazine will then pop out of the gun.

2. Remove the bolt

The next step is to remove the bolt from the Remington 870. To do this, grasp the bolt handle and pull it all the way to the rear. The bolt will then come out of the gun.

3. Disassemble the action assembly

The third step is to disassemble the action assembly of the Remington 870. To do this, remove the two takedown pins located on the bottom of the receiver. The action assembly will then come apart.

4. Remove the barrel

The final step is to remove the barrel from the Remington 870. To do this, unscrew the barrel from the receiver. The barrel will then come off of the gun.

Reassembling the Remington 870

Reassembling the Remington 870 is the reverse of disassembling it. To reassemble the gun, follow these steps:

1. Attach the barrel to the receiver.
2. Insert the action assembly into the receiver.
3. Replace the takedown pins.
4. Insert the bolt into the receiver.
5. Insert the magazine into the gun.

Cleaning and Lubrication

It is important to clean and lubricate the Remington 870 regularly to keep it in good working order. To clean the gun, use a solvent and a brush to remove any dirt or debris. Be sure to clean the action assembly, the barrel, and the magazine.

To lubricate the gun, use a light oil. Apply the oil to the action assembly, the barrel, and the magazine.

Storing the Remington 870

When you are not using the Remington 870, it is important to store it in a safe place. Make sure that the gun is unloaded and that the safety is on. Store the gun in a locked cabinet or safe.

The Remington 870 is a great shotgun that is easy to use and maintain. By following these steps, you can safely disassemble, reassemble, clean, and lubricate your Remington 870.

How To Disassemble Remington 870?

Q: What tools do I need to disassemble a Remington 870?

A: You will need the following tools:

• A punch
• A hammer
• A screwdriver
• A cleaning rod
• A rag

Q: How do I disassemble the action of a Remington 870?

A: To disassemble the action of a Remington 870, follow these steps:

1. Remove the magazine tube by depressing the magazine cap button and pulling the tube out of the receiver.
2. Remove the bolt by pulling it to the rear and disengaging the bolt release.
3. Remove the bolt assembly by pulling it out of the receiver.
4. Remove the firing pin assembly by depressing the firing pin retainer and pulling the firing pin out of the bolt.
5. Remove the extractor by depressing the extractor spring and pulling the extractor out of the bolt.

Q: How do I disassemble the barrel of a Remington 870?

A: To disassemble the barrel of a Remington 870, follow these steps:

1. Remove the magazine tube.
2. Remove the barrel nut by turning it counterclockwise until it is loose.
3. Remove the barrel by pulling it forward and out of the receiver.

Q: How do I reassemble a Remington 870?

A: To reassemble a Remington 870, follow these steps:

1. Assemble the barrel to the receiver by inserting the barrel into the receiver and turning the barrel nut clockwise until it is tight.
2. Insert the magazine tube into the receiver.
3. Assemble the bolt assembly to the receiver by inserting the bolt into the receiver and engaging the bolt release.
4. Assemble the extractor to the bolt by depressing the extractor spring and inserting the extractor into the bolt.
5. Assemble the firing pin assembly to the bolt by depressing the firing pin retainer and inserting the firing pin into the bolt.

Q: What are some common problems with Remington 870s?

A: Some common problems with Remington 870s include:

• Failure to feed
• Failure to eject
• Jams
• Rust
• Broken parts

Q: How can I troubleshoot problems with my Remington 870?

A: If you are having problems with your Remington 870, here are some troubleshooting tips:

• Check the ammunition to make sure it is the correct type and is in good condition.
• Clean and lubricate the gun according to the manufacturer’s instructions.
• Check the action of the gun to make sure it is operating smoothly.
• Look for signs of rust or damage and repair or replace any damaged parts.

Q: Where can I get help with my Remington 870?

If you are having problems with your Remington 870, you can get help from the following sources:

• The Remington website: https://www.remington.com/
• The Remington customer service department: 1-800-243-9700
• A local gunsmith

  In this comprehensive guide, we have discussed how to disassemble a Remington 870 shotgun in detail. We have covered all the steps involved in the disassembly process, from removing the magazine tube to taking out the bolt assembly. We have also provided tips and tricks to help you troubleshoot any problems you may encounter.

We hope that this guide has been helpful and that you now feel confident in your ability to disassemble and reassemble your Remington 870 shotgun. If you have any further questions, please do not hesitate to contact us.