How to Disassemble a Remington 1100 for Cleaning and Maintenance

How to Disassemble a Remington 1100

The Remington 1100 is a popular semi-automatic shotgun that is known for its reliability and accuracy. It is a relatively simple gun to disassemble and reassemble, and doing so can help you to clean it properly and troubleshoot any problems. In this article, we will walk you through the steps of disassembling a Remington 1100 step-by-step.

We will start by removing the magazine and bolt assembly, then we will disassemble the receiver and action. Finally, we will remove the barrel and forearm. By the end of this article, you will have a complete understanding of how to disassemble a Remington 1100.

Disassembling the Remington 1100

1. Remove the magazine

To remove the magazine, first depress the magazine release button located on the bottom of the receiver. This will release the magazine from the gun.

2. Remove the bolt assembly

To remove the bolt assembly, first pull back on the bolt handle and lock the bolt open. Then, grasp the bolt assembly and pull it straight out of the receiver.

3. Disassemble the receiver and action

To disassemble the receiver and action, first remove the two screws that secure the action to the receiver. Once the screws are removed, the action can be lifted out of the receiver.

4. Remove the barrel and forearm

To remove the barrel and forearm, first remove the barrel cap screw. Once the screw is removed, the barrel can be pulled out of the receiver. The forearm can then be removed by unscrewing the two forearm screws.

Reassembling the Remington 1100

Reassembling the Remington 1100 is the reverse of disassembling it. First, insert the barrel into the receiver. Then, install the forearm and tighten the two forearm screws. Next, install the action into the receiver and tighten the two screws. Finally, install the magazine and bolt assembly.

By following these steps, you can easily disassemble and reassemble your Remington 1100. This will allow you to clean it properly and troubleshoot any problems that may arise.

Step	Instructions	Image
1	Remove the magazine.
2	Unscrew the action screws.
3	Separate the action from the stock.
4	Remove the bolt assembly.
5	Remove the barrel.

The Remington 1100 is a popular semi-automatic shotgun that is known for its reliability and accuracy. It is a good choice for a variety of hunting and shooting applications. However, like any firearm, it is important to know how to properly disassemble it for cleaning and maintenance.

This guide will walk you through the steps of disassembling a Remington 1100. It is important to note that this guide is only for informational purposes. Always refer to the owner’s manual for your specific firearm for detailed instructions.

Safety Precautions

Before you begin disassembling your Remington 1100, there are a few safety precautions you should take:

• Wear eye protection and hearing protection. This will protect your eyes and ears from any debris that may be released during disassembly.
• Keep the firearm pointed in a safe direction. This means pointing the muzzle away from yourself and others at all times.
• Disassemble the firearm in a well-lit area. This will make it easier to see what you are doing.
• Do not disassemble the firearm if it is loaded. This is a safety hazard and could result in serious injury or death.

Disassembling the Action

To disassemble the action of a Remington 1100, you will need to:

1. Remove the magazine.
2. Open the action.
3. Remove the bolt assembly.
4. Remove the firing pin assembly.
5. Remove the extractor assembly.

1. Remove the magazine.

To remove the magazine, press the magazine release button located on the left side of the receiver. The magazine will then pop out of the bottom of the receiver.

2. Open the action.

To open the action, grasp the bolt handle and pull it all the way to the rear. The action will then open, exposing the bolt assembly.

3. Remove the bolt assembly.

To remove the bolt assembly, grasp the bolt handle and pull it all the way to the rear. While holding the bolt handle to the rear, use your other hand to push the bolt release button located on the right side of the receiver. The bolt will then release and you can remove it from the receiver.

4. Remove the firing pin assembly.

To remove the firing pin assembly, grasp the bolt assembly and turn it counterclockwise until the firing pin is aligned with the firing pin hole in the receiver. While holding the bolt assembly in this position, use a small punch to push the firing pin out of the bolt assembly.

5. Remove the extractor assembly.

To remove the extractor assembly, grasp the bolt assembly and turn it clockwise until the extractor is aligned with the extractor hole in the receiver. While holding the bolt assembly in this position, use a small punch to push the extractor out of the bolt assembly.

Once you have disassembled the action of your Remington 1100, you can clean and maintain it. Be sure to follow the instructions in the owner’s manual for your specific firearm.

When you are finished cleaning and maintaining your Remington 1100, you can reassemble it by following the steps in reverse order. Be sure to make sure that all of the parts are properly aligned before you close the action.

By following these steps, you can safely disassemble and reassemble your Remington 1100. This will help you to keep your firearm in good working order and ensure that it is safe to use.

Disassembling the Receiver

To disassemble the receiver of a Remington 1100, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A punch
• A hammer

1. Remove the magazine from the receiver.
2. Remove the two Phillips head screws on the bottom of the receiver.
3. Use a punch and hammer to drive out the two roll pins that secure the trigger assembly to the receiver.
4. Remove the trigger assembly from the receiver.
5. Remove the two flathead screws on the top of the receiver.
6. Use a punch and hammer to drive out the two roll pins that secure the bolt assembly to the receiver.
7. Remove the bolt assembly from the receiver.

The receiver is now disassembled.

Disassembling the Barrel

To disassemble the barrel of a Remington 1100, you will need the following tools:

• A hex wrench
• A punch
• A hammer

1. Remove the magazine from the receiver.
2. Remove the barrel from the receiver.
3. Remove the two hex screws that secure the barrel to the receiver.
4. Use a punch and hammer to drive out the roll pin that secures the extractor to the barrel.
5. Remove the extractor from the barrel.
6. Use a punch and hammer to drive out the roll pin that secures the ejector to the barrel.
7. Remove the ejector from the barrel.

The barrel is now disassembled.

Disassembling the Stock

To disassemble the stock of a Remington 1100, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver

1. Remove the two Phillips head screws on the bottom of the stock.
2. Remove the two flathead screws on the top of the stock.

The stock is now disassembled.

Reassembling the Remington 1100

To reassemble the Remington 1100, you will need to follow these steps in the reverse order of disassembly.

1. Reassemble the stock.
2. Reassemble the barrel.
3. Reassemble the receiver.

The Remington 1100 is now reassembled.

Disassembling and reassembling a Remington 1100 is a relatively simple process. By following these steps, you can safely and easily maintain your firearm.

How do I disassemble a Remington 1100?

1. Remove the magazine.
2. Lock the bolt to the rear.
3. Press the release button located on the bottom of the receiver and remove the bolt assembly.
4. Remove the trigger assembly by depressing the two spring-loaded pins on the bottom of the receiver and lifting the assembly out.
5. Remove the barrel by unscrewing the two screws at the front of the receiver.

What tools do I need to disassemble a Remington 1100?

You will need a screwdriver and a punch to disassemble a Remington 1100.

What is the difference between a Remington 1100 and a Remington 11-87?

The Remington 1100 and the Remington 11-87 are both semi-automatic shotguns, but there are some key differences between the two models. The 1100 was introduced in 1963 and is still in production today, while the 11-87 was introduced in 1987 and was discontinued in 2006. The 1100 is a gas-operated shotgun, while the 11-87 is a recoil-operated shotgun. The 1100 has a magazine capacity of 5 rounds, while the 11-87 has a magazine capacity of 3 rounds. The 1100 is available in a variety of finishes, while the 11-87 is only available in a black finish.

What are the advantages and disadvantages of a Remington 1100?

The Remington 1100 is a well-respected shotgun that is known for its reliability and accuracy. Some of the advantages of the 1100 include its ease of use, its wide availability, and its affordable price. Some of the disadvantages of the 1100 include its weight, its recoil, and its lack of aftermarket support.

**What is the best way to clean a Remington 1100?

To clean a Remington 1100, you will need a cleaning kit, some gun oil, and some solvent. First, remove the magazine and the bolt assembly. Then, remove the trigger assembly by depressing the two spring-loaded pins on the bottom of the receiver and lifting the assembly out. Next, remove the barrel by unscrewing the two screws at the front of the receiver. Finally, clean all of the parts with solvent and oil.

What are some common problems with a Remington 1100?

Some of the common problems with a Remington 1100 include feeding problems, cycling problems, and trigger problems. Feeding problems can be caused by a dirty magazine or a damaged magazine spring. Cycling problems can be caused by a dirty bolt assembly or a damaged bolt spring. Trigger problems can be caused by a worn trigger spring or a damaged trigger assembly.

How can I fix a Remington 1100 that is not feeding properly?

If your Remington 1100 is not feeding properly, you can try the following:

1. Clean the magazine and the magazine spring.
2. Check the magazine for damage.
3. Make sure that the magazine is properly inserted into the gun.
4. Check the bolt assembly for damage.
5. Clean the bolt assembly.
6. Lubricate the bolt assembly.

If you have tried these steps and your Remington 1100 is still not feeding properly, you may need to take it to a gunsmith for repair.

In this blog post, we have discussed how to disassemble a Remington 1100 shotgun. We started by discussing the safety precautions that should be taken before disassembling the shotgun. We then provided step-by-step instructions on how to disassemble the shotgun, including how to remove the barrel, bolt, and action assembly. We concluded by discussing how to reassemble the shotgun.

We hope that this blog post has been helpful in teaching you how to disassemble a Remington 1100 shotgun. If you have any questions, please feel free to leave them in the comments section below.

Here are some key takeaways from this blog post:

• Always follow the safety precautions when disassembling a firearm.
• The Remington 1100 shotgun can be disassembled by removing the barrel, bolt, and action assembly.
• To reassemble the shotgun, reverse the steps for disassembly.