How To Decock A Tenpoint Crossbow?

How to Decock a Tenpoint Crossbow

Crossbows are powerful weapons that can be dangerous if not handled properly. Decocking a crossbow is the process of safely lowering the drawstring to its resting position. It is important to decock your crossbow before storing it or transporting it, and it is also a good idea to decock it after each use.

This article will provide you with step-by-step instructions on how to decock a Tenpoint crossbow. We will also discuss some safety tips for handling crossbows.

Step-by-step instructions for decocking a Tenpoint crossbow:

1. Ensure that the crossbow is unloaded.
2. Cock the crossbow.
3. Locate the decocking lever.
4. Press down on the decocking lever until the drawstring is released.
5. Allow the drawstring to return to its resting position.

Safety tips for handling crossbows:

• Always treat a crossbow as if it is loaded, even if you know it is not.
• Never point a crossbow at anything you do not intend to shoot.
• Keep the safety engaged when not shooting.
• Be aware of your surroundings when shooting a crossbow.
• Wear eye protection and hearing protection when shooting a crossbow.

By following these steps and safety tips, you can safely decock your Tenpoint crossbow and enjoy your time shooting.

Step	Action	Instructions
1	Uncock the crossbow	Press the safety button and pull back on the trigger until the string is released.
2	Remove the bolt	Press the bolt release button and pull the bolt out of the crossbow.
3	Store the crossbow	Place the crossbow in a safe place where it cannot be accessed by children.

How To Decock A Tenpoint Crossbow?

Tenpoint crossbows are some of the most popular crossbows on the market, and for good reason. They are well-made, accurate, and powerful. However, like all crossbows, they can be dangerous if not handled properly. One of the most important safety precautions to take when using a Tenpoint crossbow is to know how to decock it properly.

Decocking a Tenpoint crossbow is a simple process, but it is important to follow the steps carefully to avoid any accidents.

Safety Precautions

Before you begin decocking your Tenpoint crossbow, there are a few safety precautions you should take:

• Wear eye protection. Crossbows can fire projectiles at high speeds, and even a small piece of debris can cause serious eye injury. Always wear eye protection when handling a crossbow, even if you are not planning on shooting it.
• Uncock the crossbow in a safe direction. Always point the crossbow in a safe direction when uncocking it. This means away from people, animals, and property.
• Keep the crossbow pointed away from people and animals. Even when the crossbow is uncocked, it is still dangerous. Keep the crossbow pointed away from people and animals at all times.
• Store the crossbow in a safe place. When you are not using your crossbow, store it in a safe place where it is not accessible to children or other unauthorized persons.

Decocking the Crossbow

To decock a Tenpoint crossbow, follow these steps:

1. Activate the safety. The safety on a Tenpoint crossbow is located on the back of the stock. To activate the safety, slide the lever up to the “safe” position.
2. Pull the trigger. With the safety activated, pull the trigger. This will release the cocking mechanism and allow the crossbow to be decocked.
3. Hold the trigger back while pulling the cocking lever down. Once the trigger has been pulled, hold it back while you pull the cocking lever down. This will disengage the cocking mechanism and allow the crossbow to be fully decocked.
4. Release the trigger. Once the cocking lever is fully down, release the trigger. The crossbow is now decocked and safe to handle.

Decocking a Tenpoint crossbow is a simple process, but it is important to follow the steps carefully to avoid any accidents. By taking the necessary safety precautions and following the steps outlined in this guide, you can safely decock your Tenpoint crossbow and enjoy your shooting experience without worry.

How To Decock A Tenpoint Crossbow?

1. Disassembling the Crossbow

To decock a Tenpoint crossbow, you will first need to disassemble it. To do this, follow these steps:

1. Remove the bolt from the crossbow.
2. Unscrew the two bolts that hold the stock to the crossbow.
3. Remove the stock from the crossbow.
4. Unscrew the two bolts that hold the limbs to the crossbow.
5. Remove the limbs from the crossbow.
6. Unscrew the two bolts that hold the string to the crossbow.
7. Remove the string from the crossbow.

2. Decocking the Crossbow

Once the crossbow is disassembled, you can decock it. To do this, follow these steps:

1. Place the crossbow on a flat surface.
2. Grasp the cocking lever with one hand and the string with the other hand.
3. Pull the string back until it is in the cocked position.
4. While holding the string back, use your other hand to push down on the safety.
5. Release the string and the safety simultaneously.

The crossbow should now be decocked.

3. Checking the Crossbow

Before reassembling the crossbow, you should check to make sure it is unloaded and that the safety is engaged. To do this, follow these steps:

1. Remove the bolt from the crossbow.
2. Look inside the crossbow to make sure there is no bolt in the barrel.
3. Engage the safety.

If the crossbow is unloaded and the safety is engaged, you can proceed to reassemble the crossbow.

4. Reassembling the Crossbow

To reassemble the crossbow, follow these steps:

1. Reattach the stock to the crossbow.
2. Reattach the limbs to the crossbow.
3. Reattach the string to the crossbow.
4. Screw the two bolts that hold the stock to the crossbow.
5. Screw the two bolts that hold the limbs to the crossbow.
6. Screw the two bolts that hold the string to the crossbow.

The crossbow is now reassembled and ready to use.

Additional Tips

• Practice decocking the crossbow until you are comfortable with the process.
• If you are ever unsure about how to decock the crossbow, consult the owner’s manual.
• Never decock the crossbow while it is loaded.
• Always wear eye protection when decocking the crossbow.

Decocking a Tenpoint crossbow is a simple process that can be completed in a few minutes. By following these steps, you can safely decock your crossbow and prevent any accidents.

How do I decock a Tenpoint crossbow?

1. Uncock the crossbow by pulling back the safety lever and pressing the trigger. This will release the tension on the crossbow’s string and allow you to safely lower the bow.
2. Check to make sure that the crossbow is unloaded. There should be no arrow in the crossbow’s flight rail.
3. Store the crossbow in a safe place. Keep the crossbow out of reach of children and pets.

What should I do if the crossbow is still cocked after I have pulled the safety lever and pressed the trigger?

1. Try pulling the safety lever back again and pressing the trigger. This may release the tension on the crossbow’s string.
2. If the crossbow is still cocked, you can try to decock it by hand. Carefully grasp the crossbow’s string with one hand and pull it back until it is released. Be careful not to release the string too quickly, as this could cause the crossbow to fire.
3. If you are unable to decock the crossbow by yourself, take it to a qualified gunsmith for assistance.

What are the safety precautions I should take when using a Tenpoint crossbow?

• Always wear eye protection when using a crossbow. This will protect your eyes from any debris that may be released when the crossbow is fired.
• Never point the crossbow at anything you do not intend to shoot. This includes yourself, other people, and animals.
• Be sure to follow all of the manufacturer’s instructions for safe use of the crossbow.

What are the different types of Tenpoint crossbows?

Tenpoint crossbows come in a variety of models, each with its own unique features. Some of the most popular models include the:

• Tenpoint Carbon Air RS4
• Tenpoint Viper XRT
• Tenpoint Nitro X
• Tenpoint Wicked Ridge RDX

These crossbows are all designed for different purposes, so it is important to choose the right one for your needs.

Where can I buy a Tenpoint crossbow?

Tenpoint crossbows are available for purchase at a variety of retailers, both online and offline. Some of the most popular retailers include:

• Tenpoint Crossbows
• Amazon
• Cabela’s
• Bass Pro Shops

You can also find Tenpoint crossbows at some local gun shops.

decocking a Tenpoint crossbow is a simple process that can be completed in a few steps. By following the steps outlined in this article, you can safely and effectively decock your crossbow and prevent any accidents.

Here are the key takeaways:

• To decock a Tenpoint crossbow, you must first remove the magazine.
• Next, you must engage the safety.
• Then, you must pull back on the cocking handle until it stops.
• Finally, you must release the safety.

By following these steps, you can safely and effectively decock your Tenpoint crossbow.