How To Clean A 9mm Ruger?

ByBuffalo Rifles Blog

How to Clean a 9mm Ruger

Your Ruger 9mm pistol is a reliable and accurate firearm, but it needs to be cleaned regularly to maintain its performance. Cleaning your Ruger 9mm is a relatively simple task, but it’s important to do it correctly to avoid damaging the gun.

In this article, we’ll walk you through the steps of cleaning a Ruger 9mm pistol. We’ll cover everything from disassembling the gun to cleaning and lubricating the internal components. By the end of this article, you’ll be able to clean your Ruger 9mm pistol like a pro.

So, if you’re ready to learn how to clean your Ruger 9mm, read on!

Step Instructions Image
1 Remove the magazine and any cartridges from the gun.
2 Disassemble the gun according to the manufacturer’s instructions.
3 Clean the exterior of the gun with a soft cloth and gun oil.
4 Clean the barrel with a bore brush and gun solvent.
5 Reassemble the gun and apply a light coat of gun oil to all moving parts.

Safety Precautions

Before you begin cleaning your Ruger 9mm pistol, it is important to take some safety precautions to protect yourself and others.

  • Always unload the gun before cleaning it. This means removing the magazine and checking the chamber to make sure there is no round in the gun.
  • Double-check to make sure the gun is unloaded. It is easy to make a mistake, so it is always important to double-check to make sure the gun is unloaded before you begin cleaning it.
  • Keep the gun pointed in a safe direction. Even if you are sure the gun is unloaded, it is important to keep it pointed in a safe direction at all times. This means pointing it at the ground or a safe object.
  • Wear eye protection. When cleaning a gun, there is always a risk of small parts or debris flying into your eyes. To protect yourself, wear eye protection such as safety glasses or goggles.
  • Use the right cleaning tools. There are a variety of different cleaning tools available for guns. Make sure you use the right tools for the job to avoid damaging your gun.

Disassembly

To disassemble your Ruger 9mm pistol, follow these steps:

1. Remove the magazine.
2. Lock the slide back.
3. Press the takedown lever down and rotate it 90 degrees.
4. Pull the slide forward and off of the frame.
5. Remove the recoil spring and guide rod from the slide.
6. Remove the barrel from the slide.

Now that your gun is disassembled, you can begin cleaning it.

Cleaning

To clean your Ruger 9mm pistol, you will need the following supplies:

  • Gun cleaning solvent
  • Gun cleaning brush
  • Gun cleaning patches
  • Rag
  • Oil

1. Soak a cleaning patch in gun cleaning solvent and wipe down the exterior of the gun.
2. Use a cleaning brush to clean the inside of the barrel.
3. Use a cleaning patch to dry the barrel.
4. Apply a small amount of oil to the moving parts of the gun.
5. Reassemble the gun.

Now that your gun is clean, it is ready to be put back into service.

Cleaning your Ruger 9mm pistol is an important part of gun ownership. By following these steps, you can keep your gun in good working order and prevent it from becoming damaged.

Disassembly (1)

To disassemble your Ruger 9mm pistol, follow these steps:

1. Remove the magazine from the pistol.
2. Depress the slide lock and pull the slide rearward until it is fully open.
3. Rotate the takedown lever 90 degrees clockwise.
4. Move the slide forward and off of the frame.
5. Remove the recoil spring assembly from the barrel.
6. Remove the barrel from the slide.

Cleaning (3)

To clean your Ruger 9mm pistol, you will need:

  • A cleaning kit specific for your pistol
  • Gun oil
  • A rag

1. Remove the slide and barrel from the frame as described in the disassembly section above.
2. Soak a cleaning patch in gun oil and run it through the bore of the barrel.
3. Use a bore brush to clean the inside of the barrel.
4. Clean the slide rails with a cleaning patch.
5. Clean the inside of the frame with a cleaning patch.
6. Reassemble the pistol.

Reassembly (4)

To reassemble your Ruger 9mm pistol, follow these steps:

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the barrel.
3. Move the slide forward until it is fully seated on the frame.
4. Rotate the takedown lever 90 degrees counterclockwise.
5. Insert the magazine into the pistol.

Your Ruger 9mm pistol is now clean and reassembled.

By following these steps, you can easily clean and maintain your Ruger 9mm pistol. This will help to ensure that your pistol is functioning properly and that it is safe to use.

How do I clean a 9mm Ruger?

1. Disassemble the Ruger. Remove the magazine and all cartridges from the firearm. Then, field-strip the Ruger according to the manufacturer’s instructions.
2. Clean the exterior of the Ruger. Use a soft cloth or brush to remove any dirt, dust, or debris from the exterior of the firearm. Be careful not to damage the finish.
3. Clean the barrel. Use a cleaning rod and bore brush to clean the barrel of the Ruger. Apply a small amount of gun cleaning solvent to the brush, and then work it back and forth through the barrel until it is clean.
4. Clean the action. Use a cleaning cloth or brush to clean the action of the Ruger. Be sure to remove any dirt, dust, or debris from the trigger assembly, sear, and hammer.
5. Lubricate the Ruger. Apply a light coat of gun oil to all moving parts of the Ruger. This will help to protect the firearm from rust and corrosion.
6. Reassemble the Ruger. Reassemble the Ruger according to the manufacturer’s instructions.

What cleaning supplies do I need?

You will need the following cleaning supplies to clean a 9mm Ruger:

  • A soft cloth or brush
  • Gun cleaning solvent
  • A cleaning rod and bore brush
  • A cleaning cloth or brush for the action
  • Gun oil

How often should I clean my Ruger?

You should clean your Ruger after every use, or at least once a month. If you shoot your Ruger frequently, you may need to clean it more often.

What are the signs that my Ruger needs to be cleaned?

There are a few signs that your Ruger needs to be cleaned, including:

  • The firearm is not functioning properly.
  • The firearm is dirty or dusty.
  • The firearm is corroded.
  • The firearm is not shooting accurately.

What are some common mistakes people make when cleaning their Ruger?

Some common mistakes people make when cleaning their Ruger include:

  • Using too much cleaning solvent.
  • Using the wrong type of cleaning solvent.
  • Using a dirty cleaning cloth or brush.
  • Not cleaning the firearm properly.

How can I avoid making these mistakes?

To avoid making these mistakes, follow these tips:

  • Use the right amount of cleaning solvent.
  • Use the right type of cleaning solvent.
  • Use a clean cleaning cloth or brush.
  • Clean the firearm according to the manufacturer’s instructions.

    In this blog post, we have discussed how to clean a 9mm Ruger. We started by discussing the tools and materials you will need. Then, we walked you through the steps of cleaning the exterior of your gun, the barrel, and the action. Finally, we provided some tips for keeping your gun clean and well-maintained.

We hope this blog post has been helpful. If you have any questions, please do not hesitate to contact us.

Similar Posts