How To Adjust Bushnell Scope?

How to Adjust a Bushnell Scope

Whether you’re a seasoned hunter or a first-time shooter, knowing how to adjust your Bushnell scope is essential for getting the most out of your rifle. In this comprehensive guide, we’ll walk you through the process of adjusting your scope for both windage and elevation, so you can hit your target every time.

We’ll also cover some basic tips on how to choose the right scope for your rifle, and how to properly zero it in. By the end of this guide, you’ll be a pro at adjusting your Bushnell scope and taking accurate shots.

So what are you waiting for? Let’s get started!

Step	Instructions	Image
1	Mount the scope to your rifle.
2	Turn the windage adjustment knob until the crosshairs are aligned with the center of the target.
3	Turn the elevation adjustment knob until the crosshairs are aligned with the top of the target.

A Bushnell scope is a valuable tool for hunters, target shooters, and other outdoor enthusiasts. It can help you to accurately aim your firearm and hit your target. However, in order to get the most out of your scope, it is important to know how to adjust it properly.

This guide will show you how to adjust a Bushnell scope for windage, elevation, and parallax. We will also provide tips on how to zero your scope and make sure that it is properly mounted on your rifle.

Tools and Materials Needed

To adjust your Bushnell scope, you will need the following tools and materials:

• Bushnell scope
• Phillips head screwdriver
• Tape measure
• Level
• Eye protection

Steps to Adjust the Scope

1. Mount the scope to your rifle. Make sure that the scope is properly mounted to your rifle before you start adjusting it. If the scope is not mounted correctly, it will not be accurate.
2. Zero the scope. Zeroing your scope means adjusting it so that it shoots where you aim it. To zero your scope, you will need to shoot at a target at a known distance. Once you have hit the target, you can adjust the scope’s windage and elevation knobs until the scope is shooting where you aim it.
3. Adjust the windage. The windage knob is used to adjust the scope’s point of impact (POI) left or right. To adjust the windage, turn the knob clockwise to move the POI to the right and counterclockwise to move the POI to the left.
4. Adjust the elevation. The elevation knob is used to adjust the scope’s POI up or down. To adjust the elevation, turn the knob clockwise to move the POI up and counterclockwise to move the POI down.
5. Adjust the parallax. Parallax is the difference in the apparent position of an object viewed from two different positions. Parallax can cause your scope to be inaccurate, so it is important to adjust it properly. To adjust the parallax, turn the parallax knob until the reticle is clear and sharp.

Adjusting a Bushnell scope is not difficult, but it is important to do it correctly. By following the steps in this guide, you can ensure that your scope is accurate and that you can hit your target every time.

Here are some additional tips for adjusting your Bushnell scope:

• Make sure that you are using the correct tools and materials.
• Read the instructions carefully before you start adjusting the scope.
• Be patient and take your time.
• If you are not comfortable adjusting the scope yourself, take it to a qualified gunsmith.

How To Adjust Bushnell Scope?

Bushnell scopes are some of the most popular and well-respected scopes on the market. They are known for their high quality, accuracy, and durability. However, even the best scopes can need to be adjusted from time to time. This is especially true if you are using your scope for a variety of different shooting applications.

In this guide, we will show you how to adjust your Bushnell scope for different shooting conditions. We will cover everything from basic windage and elevation adjustments to more advanced adjustments, such as parallax and eye relief.

3. Remove the scope from the rifle.

Before you can adjust your Bushnell scope, you will need to remove it from the rifle. To do this, follow these steps:

1. Open the bolt on your rifle and remove the chambered round.
2. Locate the two scope rings on the rifle. These are the metal rings that hold the scope in place.
3. Use a screwdriver to loosen the screws that hold the scope rings in place.
4. Carefully lift the scope off of the rifle.

4. Loosen the locking screws on the scope.

Once you have removed the scope from the rifle, you will need to loosen the locking screws on the scope. These screws are located on the side of the scope and are used to hold the scope’s internal components in place.

To loosen the locking screws, use a small screwdriver. Turn the screws counterclockwise until they are loose enough to allow you to move the scope’s internal components.

.

In this guide, we have shown you how to adjust your Bushnell scope for different shooting conditions. We have covered everything from basic windage and elevation adjustments to more advanced adjustments, such as parallax and eye relief.

By following these steps, you can ensure that your Bushnell scope is properly adjusted for your specific shooting needs.

How do I adjust the windage on my Bushnell scope?

1. Locate the windage adjustment knob. This is usually a small, knurled knob located on the left side of the scope, near the eyepiece.
2. Turn the knob clockwise to move the crosshairs to the right, or counterclockwise to move them to the left. Each full turn of the knob will move the crosshairs by about 1/4 MOA (minute of angle).
3. Test your adjustment by firing a few shots at a target. If the shots are hitting to the left or right of your point of aim, adjust the windage knob accordingly.

How do I adjust the elevation on my Bushnell scope?

1. Locate the elevation adjustment knob. This is usually a large, knurled knob located on the right side of the scope, near the objective lens.
2. Turn the knob clockwise to move the crosshairs up, or counterclockwise to move them down. Each full turn of the knob will move the crosshairs by about 1/4 MOA (minute of angle).
3. Test your adjustment by firing a few shots at a target. If the shots are hitting above or below your point of aim, adjust the elevation knob accordingly.

How do I zero my Bushnell scope?

1. Find a flat, open area where you can shoot safely.
2. Set up a target at a known distance, such as 25 yards.
3. Mount your scope to your rifle and make sure it is properly sighted in.
4. Fire a few shots at the target, aiming at the center of the bullseye.
5. Adjust the windage and elevation knobs until your shots are grouping tightly around the bullseye.
6. Repeat steps 4-5 until you are satisfied with your accuracy.

What are the different types of Bushnell scopes?

Bushnell offers a wide variety of scopes to meet the needs of different shooters. Some of the most popular types include:

• Hunting scopes: These scopes are designed for hunting small game, big game, and varmints. They typically feature a wide field of view and a variable magnification range.
• Target shooting scopes: These scopes are designed for precision shooting at long distances. They typically feature a high magnification range and a fine crosshair reticle.
• Tactical scopes: These scopes are designed for use with tactical rifles. They typically feature a rugged construction and a powerful magnification range.

What are the benefits of using a Bushnell scope?

Bushnell scopes are known for their high quality, performance, and value. Some of the benefits of using a Bushnell scope include:

• Clear, bright optics: Bushnell scopes use high-quality glass and lenses to provide clear, bright images.
• Reliable performance: Bushnell scopes are built to withstand the rigors of everyday use.
• Affordable prices: Bushnell scopes offer excellent value for the money.

Where can I buy a Bushnell scope?

Bushnell scopes are available at a variety of retailers, including sporting goods stores, online retailers, and gun shops. You can also find Bushnell scopes at the Bushnell website.

adjusting a Bushnell scope is a fairly simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your scope is properly aligned and that you are getting the most out of your rifle.

Here are a few key takeaways:

• The first step is to ensure that your rifle is properly mounted to a solid surface.
• Once the rifle is mounted, you can begin to adjust the scope.
• The windage knob is used to move the crosshairs left or right, while the elevation knob is used to move them up or down.
• Be sure to make small adjustments and check your shot placement after each one.
• Once you are satisfied with the scope’s alignment, you can tighten the locking screws.

By following these steps, you can easily adjust your Bushnell scope and improve your accuracy.