How Much Does Cerakote Cost for a Pistol?
How Much Cerakote For A Pistol?
Cerakote is a popular firearm finish that offers a number of benefits over traditional finishes, including increased durability, corrosion resistance, and heat tolerance. But how much Cerakote do you need for a pistol?
The amount of Cerakote you need will depend on the size and complexity of the pistol. A small, simple pistol will require less Cerakote than a large, complex pistol. As a general rule of thumb, you can expect to use about 1 ounce of Cerakote per square foot of surface area. So, for a pistol that measures 12 inches long by 6 inches wide by 3 inches high, you would need about 12 ounces of Cerakote.
Of course, this is just a rough estimate. The actual amount of Cerakote you need may vary depending on the specific pistol and the desired finish. If you’re not sure how much Cerakote you need, it’s always best to err on the side of caution and order a little extra.
In this article, we’ll discuss how much Cerakote you need for a pistol in more detail. We’ll also cover the different factors that affect the amount of Cerakote you need, and we’ll provide tips on how to apply Cerakote evenly and efficiently.
So, if you’re thinking about Cerakoting your pistol, read on for all the information you need to know!
| Cerakote Color | Price per Ounce | Total Cost |
|---|---|---|
| Black | $30 | $90 |
| OD Green | $35 | $105 |
| FDE | $40 | $120 |
How Much Cerakote Do I Need?
The amount of Cerakote you need will depend on the size and shape of your pistol. You will also need to account for any areas that you do not want to be coated, such as the sights or the trigger.
As a general rule of thumb, you will need about one ounce of Cerakote per square foot of surface area. However, this may vary depending on the specific type of Cerakote you are using and the thickness of the coating you want to apply.
To determine the exact amount of Cerakote you need, you can measure the surface area of your pistol using a tape measure. Once you have the surface area, you can multiply it by the desired thickness of the coating to get the total amount of Cerakote you need.
For example, if your pistol has a surface area of 10 square feet and you want to apply a coating that is 0.001 inches thick, you will need 10 x 0.001 = 0.01 ounces of Cerakote.
It is important to note that you will need to apply multiple coats of Cerakote to achieve the desired thickness. The number of coats you need will depend on the specific type of Cerakote you are using. However, you will typically need to apply at least three coats of Cerakote to achieve a durable finish.
When applying Cerakote, it is important to work in a well-ventilated area and to wear gloves to protect your hands. You should also follow the manufacturer’s instructions carefully to ensure that you get the best results.
What Type of Cerakote Should I Use?
There are many different types of Cerakote available, each with its own unique properties. You will need to choose a Cerakote that is compatible with the material of your pistol and that will provide the desired level of protection.
Some of the most popular types of Cerakote for pistols include:
- Cerakote H-Series: This type of Cerakote is designed for high-stress applications and provides excellent wear resistance. It is ideal for pistols that are used for competition shooting or self-defense.
- Cerakote N-Series: This type of Cerakote is designed for corrosion resistance and is ideal for pistols that will be exposed to harsh environments. It is also available in a matte finish that is less reflective than the standard Cerakote finish.
- Cerakote T-Series: This type of Cerakote is designed for thermal protection and is ideal for pistols that will be used in hot or cold environments. It is also available in a matte finish that is less reflective than the standard Cerakote finish.
When choosing a Cerakote for your pistol, you should also consider the color you want. Cerakote is available in a wide variety of colors, so you can choose a color that matches your personal style or that will help your pistol blend in with your surroundings.
It is important to note that the type of Cerakote you use will affect the overall cost of the project. Cerakote H-Series is the most expensive type of Cerakote, while Cerakote N-Series and Cerakote T-Series are less expensive.
How to Apply Cerakote to a Pistol
Applying Cerakote to a pistol is a relatively simple process, but it does require some preparation and care. Here are the steps involved in applying Cerakote to a pistol:
1. Prepare the pistol. Before you can apply Cerakote to your pistol, you need to prepare it by cleaning it thoroughly and removing any oils or grease. You should also remove any parts that you do not want to be coated, such as the sights or the trigger.
2. Apply a primer. Once the pistol is clean, you need to apply a primer to the surface. This will help the Cerakote to adhere to the pistol and prevent it from chipping or peeling.
3. Apply the Cerakote. Once the primer is dry, you can apply the Cerakote to the pistol. You should apply the Cerakote in thin coats, allowing each coat to dry completely before applying the next coat.
4. Cure the Cerakote. Once you have applied all of the coats of Cerakote, you need to cure it. This can be done by baking the pistol in an oven or by using a heat gun.
Cerakote is a durable and long-lasting finish that can protect your pistol from wear and tear. By following these steps, you can apply Cerakote to your pistol and give it a new look that will last for years to come.
Cerakote is a great way to protect your pistol from wear and tear. By choosing the right type of Cerakote and following the application instructions carefully, you can give your pistol a new look that will last for years to come.
Here are
How Much Cerakote For A Pistol?
Cerakote is a popular choice for firearm coatings because it is durable, corrosion-resistant, and offers a wide range of color options. However, one of the biggest questions people have about Cerakote is how much they need to buy.
The amount of Cerakote you need for a pistol will depend on the size and complexity of the firearm. A small, simple pistol will require less Cerakote than a large, complex pistol. As a general rule of thumb, you will need about 1 ounce of Cerakote per square foot of surface area.
So, if you have a pistol that is 12 inches long and 6 inches wide, you will need about 7 ounces of Cerakote. However, it is always best to err on the side of caution and buy a little more Cerakote than you think you need. That way, you will have plenty of Cerakote to cover any mistakes you make during the application process.
Here is a table that provides a more detailed estimate of how much Cerakote you will need for different types of pistols:
| Pistol Type | Surface Area (sq ft) | Amount of Cerakote (oz) |
|—|—|—|
| Small, simple pistol | 1-2 | 1-2 |
| Medium-sized pistol | 2-4 | 2-4 |
| Large, complex pistol | 4-6 | 4-6 |
It is important to note that these are just estimates. The actual amount of Cerakote you need will vary depending on the specific firearm you are coating. If you are unsure how much Cerakote you need, it is always best to consult with a Cerakote professional.
How to Apply Cerakote to a Pistol
Applying Cerakote to a pistol is a relatively simple process, but it does require some specialized equipment and materials. The steps involved in applying Cerakote to a pistol include:
1. Preparing the pistol for coating
2. Applying the Cerakote
3. Curing the Cerakote
Preparing the Pistol for Coating
The first step in applying Cerakote to a pistol is to prepare the pistol for coating. This involves cleaning the pistol thoroughly and removing any oils or grease from the surface. You can use a mild soap and water to clean the pistol, or you can use a commercial solvent designed for cleaning firearms.
Once the pistol is clean, you will need to remove any rust or corrosion from the surface. You can do this by using a commercial rust remover or by sanding the surface of the pistol.
Applying the Cerakote
Once the pistol is clean and free of rust or corrosion, you can begin applying the Cerakote. Cerakote is available in a variety of colors, so you can choose the color that best suits your firearm.
To apply Cerakote, you will need a spray gun and a respirator. You will also need to wear gloves to protect your hands.
Start by spraying a thin coat of Cerakote onto the pistol. Allow the Cerakote to dry for about 10 minutes, then apply a second coat. Continue applying coats of Cerakote until the pistol is completely covered.
Curing the Cerakote
The final step in applying Cerakote to a pistol is to cure the Cerakote. This involves heating the pistol to a specific temperature for a specific amount of time. The curing process helps to harden the Cerakote and make it more durable.
To cure Cerakote, you will need a heat gun or a curing oven. You will also need to wear gloves to protect your hands.
Start by heating the pistol to 250 degrees Fahrenheit. Allow the pistol to heat for about 30 minutes, then turn off the heat.
The pistol should be allowed to cool completely before handling it.
How to Care for Cerakote on a Pistol
Cerakote is a durable coating, but it can be damaged if it is not properly cared for. To keep your Cerakote finish looking its best, you should:
- Avoid exposing your pistol to harsh chemicals or solvents.
- Clean your pistol regularly with a mild soap and water.
- Protect your pistol from scratches and abrasions.
If your Cerakote finish does become scratched or damaged, you can repair it by applying a new coat of Cerakote.
Cerakote is a great option for firearm coatings because it is durable, corrosion-resistant, and offers a wide range of color options. Applying Cerakote to a pistol is a relatively simple process, but it does require some specialized equipment and materials. By following the steps in this guide, you can apply Cerakote to your pistol and give it a new look that will last for years to come.
How much Cerakote do I need for a pistol?
The amount of Cerakote you need for a pistol will depend on the size and complexity of the firearm. A general rule of thumb is to use 1 ounce of Cerakote per square foot of surface area. So, for a small pistol, you would need about 1 ounce of Cerakote. For a larger pistol, you may need up to 2 ounces of Cerakote.
What is the best way to apply Cerakote to a pistol?
The best way to apply Cerakote to a pistol is to use a spray gun. However, you can also apply Cerakote by hand using a brush or roller. If you are using a spray gun, be sure to use a respirator to protect your lungs from the fumes.
How long does it take to Cerakote a pistol?
The drying time for Cerakote will vary depending on the temperature and humidity. In general, it takes about 24 hours for Cerakote to dry completely. However, you can usually start handling your pistol after about 6 hours.
How much does it cost to Cerakote a pistol?
The cost of Cerakote will vary depending on the size and complexity of the firearm. A general rule of thumb is to expect to pay between $100 and $200 to Cerakote a pistol.
What are the benefits of Cerakote?
Cerakote provides a number of benefits for firearms, including:
- Increased durability: Cerakote is a hard, durable coating that can protect your firearm from scratches, dents, and corrosion.
- Increased corrosion resistance: Cerakote is resistant to chemicals, solvents, and other environmental hazards.
- Increased heat resistance: Cerakote can withstand high temperatures without melting or discoloring.
- Increased wear resistance: Cerakote is resistant to wear and tear, which can help to extend the life of your firearm.
- Customizable colors and finishes: Cerakote is available in a wide variety of colors and finishes, so you can customize your firearm to match your personal style.
Is Cerakote safe for use on firearms?
Yes, Cerakote is safe for use on firearms. Cerakote is a non-toxic, food-safe coating that does not contain any harmful chemicals.
Where can I buy Cerakote?
Cerakote is available for purchase online and at many gun stores. You can also find Cerakote at some auto body shops and paint stores.
Can I Cerakote my own pistol?
Yes, you can Cerakote your own pistol. However, it is important to note that Cerakote is a complex process that requires specialized equipment and training. If you are not experienced in applying Cerakote, it is best to have your pistol Cerakoted by a professional.
Cerakote is a durable and versatile coating that can be used on a variety of firearms. It is available in a wide range of colors and finishes, and it can be applied to both metal and polymer surfaces. The cost of Cerakote will vary depending on the size and complexity of the project, but it is typically a cost-effective way to protect your firearm.
When choosing a Cerakote color, it is important to consider the intended use of the firearm. For example, if you plan to use the firearm for hunting, you may want to choose a camouflage color that will help you blend in with your surroundings. If you plan to use the firearm for competition shooting, you may want to choose a bright color that will make it easy to see.
Cerakote is a relatively easy process to complete, but it is important to follow the manufacturer’s instructions carefully. If you are not comfortable applying Cerakote yourself, you can take your firearm to a professional Cerakote applicator.
Cerakote is a great way to protect your firearm and give it a unique look. By following the tips in this article, you can choose the right Cerakote color and apply it correctly to your firearm.